LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Custom ROCK RAILS http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=34632 |
Page 1 of 2 |
Author: | 501 [ Fri Aug 01, 2008 12:17 am ] |
Post subject: | |
Looks great Mike, can't wait to see them finished and hear how they work! |
Author: | 06 KJ Sport [ Fri Aug 01, 2008 12:42 am ] |
Post subject: | |
Can you PM me the lengths of the brackets that connect to the frame PLEASE I made a drawing of what I am going to build, just want to cheat a little to speed things up! I am going to try very hard next week to build them, since we are shutdown for Hot August Nights |
Author: | jsc7002 [ Fri Aug 01, 2008 12:48 am ] |
Post subject: | |
they look good now you just need to add a bar going across for the pinch weld, and just outta curiousity why 1/8" most use 3/16" |
Author: | Inc [ Fri Aug 01, 2008 11:55 am ] |
Post subject: | |
jsc7002 wrote: they look good now you just need to add a bar going across for the pinch weld, and just outta curiousity why 1/8" most use 3/16"
Look at the 2nd pic. There is a bar that bolts to the pinch weld. 1/8 is plenty thick enough for me, the 3/16 is only .0625" thicker. 06, I'll get you the measurements tonight. |
Author: | Neal [ Fri Aug 01, 2008 12:18 pm ] |
Post subject: | |
I think they will be fine - I agree it should be plenty |
Author: | jsc7002 [ Fri Aug 01, 2008 2:25 pm ] |
Post subject: | |
incubusmike wrote: jsc7002 wrote: they look good now you just need to add a bar going across for the pinch weld, and just outta curiousity why 1/8" most use 3/16" Look at the 2nd pic. There is a bar that bolts to the pinch weld.quote] sorry i wasnt even paying attention |
Author: | 06 KJ Sport [ Fri Aug 01, 2008 6:11 pm ] |
Post subject: | |
Author: | Inc [ Sat Aug 02, 2008 1:58 pm ] |
Post subject: | |
Finished product |
Author: | jsc7002 [ Sat Aug 02, 2008 2:21 pm ] |
Post subject: | |
so did you do the welding yourself? |
Author: | Inc [ Sat Aug 02, 2008 2:21 pm ] |
Post subject: | |
Yep. |
Author: | jsc7002 [ Sat Aug 02, 2008 2:23 pm ] |
Post subject: | |
wow a nice and speedy reply too! lol |
Author: | Inc [ Sat Aug 02, 2008 2:25 pm ] |
Post subject: | |
yep. |
Author: | 501 [ Sat Aug 02, 2008 3:04 pm ] |
Post subject: | |
Looks great Mike, now make me a set!! |
Author: | jeepmedic46 [ Sun Aug 10, 2008 5:49 pm ] |
Post subject: | |
Wish I lived closer, so I could get a set too |
Author: | LIV42DY [ Sun Aug 10, 2008 7:04 pm ] |
Post subject: | |
nice job mike. |
Author: | Inc [ Tue Aug 12, 2008 2:56 pm ] |
Post subject: | |
Thanks. |
Author: | jsc7002 [ Tue Aug 12, 2008 2:57 pm ] |
Post subject: | |
so have you got to go out and give them a good hard hit or two?? |
Author: | Inc [ Tue Aug 12, 2008 3:08 pm ] |
Post subject: | |
Took it out this week in Vegas with the fellas down there. Only touched the rails once I think but scraped 2 times on the skids. So no real testing yet. Here is a link to my first trail run since I put them on. http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=34931 |
Author: | 06 KJ Sport [ Tue Aug 12, 2008 11:37 pm ] |
Post subject: | |
Geezz at this rate I will never finish my rails I was trying to just pencil in the measurements as I went along but it is going to take for ever so I guess I am going to cheat all the way Now all I need is the measurements.....Mike can you help me out All I need is the distance from both ends to the supports and how far the 1/2" square tubing sits from the rail itself (the pinch weld bar...I guess) All help would be greatly appriciated, so that I can go to Slick Rock and play |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |