LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Gauge pod http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=37552 |
Page 1 of 1 |
Author: | durangotang [ Thu Nov 20, 2008 10:10 pm ] |
Post subject: | |
Nicely done... |
Author: | mrkake [ Thu Nov 20, 2008 10:16 pm ] |
Post subject: | |
I'd say nice work. |
Author: | bugnout [ Thu Nov 20, 2008 10:21 pm ] |
Post subject: | |
Yes, Nice work. What gauges did you install? |
Author: | 05infernoCRDL [ Fri Nov 21, 2008 3:16 pm ] |
Post subject: | |
Thanks! from left to right... boost, EGT, trans temp they are from glowshift.com the grey 7 series... i am having a problem with the vinyl styaing in place so i might run a baseball type stitch along the seams like on the steering wheel the "glue" my brother suggested apparently never dries |
Author: | teckman02 [ Fri Nov 21, 2008 8:55 pm ] |
Post subject: | Re: Gauge pod |
05infernoCRDL wrote: I made this pod out of wood fiberglass and vinyl...
1st made an oversized mold of my dash..... i actually changed my mind on what i wanted to do this was my first attempt at something like this and i realize that my spacing is a bit off... but i'm alright with that i have been looking for something like that i would be willing to pay you to make me one ...coule we get some pics on how it is mounted |
Author: | 05infernoCRDL [ Fri Nov 21, 2008 11:30 pm ] |
Post subject: | Re: Gauge pod |
teckman02 wrote: 05infernoCRDL wrote: I made this pod out of wood fiberglass and vinyl... 1st made an oversized mold of my dash..... i actually changed my mind on what i wanted to do this was my first attempt at something like this and i realize that my spacing is a bit off... but i'm alright with that i have been looking for something like that i would be willing to pay you to make me one ...coule we get some pics on how it is mounted two tiny hex bolts from my mercedes oil pan through the dash... i also ordered a male and female plug from an company that looks stock.. so when i take my dash apart i unplug it and it all comes off... all i need now is a quick disconnect for the boost tube... |
Author: | riptricket [ Sat Nov 22, 2008 2:10 am ] |
Post subject: | |
must be a CRD thing.... j/k great job! |
Author: | DocB [ Sat Nov 22, 2008 3:56 am ] |
Post subject: | |
Yes, nice. |
Author: | tjfisher*CRD [ Sat Nov 22, 2008 9:10 am ] |
Post subject: | |
very nice and very clean look |
Author: | 05infernoCRDL [ Sat Nov 22, 2008 8:28 pm ] |
Post subject: | |
rip what must be a CRD thing? they are really not that hard to make |
Author: | Xodius [ Sat Nov 22, 2008 10:13 pm ] |
Post subject: | |
looking good! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |