Basically to do my wiring I formed a piece of sheet metal that gets mounted on the little rail on the inside of the piece that folds down under the steering wheel. One side of it has a lip that catches the front of that rail, and in the back I have one tek screw holding it in place. On the formed piece I have 6 relays, two fuse blocks, and all of the wiring. I can wire all the fuses and relays (and my switches, they're mounted on the fold down piece) at my work bench, instead of laying on my front seat floor.
I also located and bought adhesive heat shrink bullet connectors to make pigtails at the lights, and adhesive shrink tubings, 60 amp fuses, 6 ga welding cable, cross linked automotive wire in multiple colors, etc. A lot of this stuff you have to buy more than you need for one set up, plus people usually buy the garbage they sell at auto parts stores.
I figured some people may like getting a whole kit thats 80% pre-wired, instead of getting the junk they get in lighting kits and still have to mount and connect everything. With my kit, all you'd have to do is run the included wires from the lights to the open terminals on the relays, run the included battery fuse and cable to the fuse panel, and bring a ground in.
I liked doing my wiring, but it could be daunting for some, and this should simplify it. There would be an AutoCAD schematic AND wiring diagram included. I'm actually redoing my wiring tonight, as this punk kid I know showed me a good deal on optilux hella's on ebay ($30 for 2, free ship) last night, so I bought some and need to add a couple relays. Once I'm done, have my rack back, run its wires, etc, I'll give a full write up.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=330306143086
_________________
2005 KJ Renegade
Fabrications for sale:
Aluminum Roof Rack (See Page 9)Aluminum Gas Tank Skid --
Radiator Skid --
Front Strut ShimsComing Soon: Rear Bumpers with lots of options