how would i do it? i was thinkin something with u bolts. i tried searching it and nothing came up. just wondering if any of u great minds had an idea on how to do this. thanks in advance!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| shovel on the spare? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=47168 |
Page 1 of 1 |
| Author: | 2003renegade [ Wed Oct 14, 2009 12:19 am ] |
| Post subject: | shovel on the spare? |
how would i do it? i was thinkin something with u bolts. i tried searching it and nothing came up. just wondering if any of u great minds had an idea on how to do this. thanks in advance!
|
|
| Author: | ga_repoman [ Fri Oct 16, 2009 1:50 am ] |
| Post subject: | .. |
What if you mounted it like a hi-lift behind the spare flip the spare mount and the extra space bolt the shovel on top behind the spare maybe use some of those rubber holders some of the guys here have for the mag lights |
|
| Author: | JeepinJarhead03 [ Fri Oct 16, 2009 2:55 am ] |
| Post subject: | |
are ya any good with a welder and grinder? i helped a guy build a hanger for his fire axe that hung the axe straight up and down inline with the right side of the spare of course you can always go to the left of the spare as well basically built a baseplate that went behind the tire carrier over the studs and then put the tire carrier back on |
|
| Author: | Inc [ Fri Oct 16, 2009 2:34 pm ] |
| Post subject: | Re: .. |
ga_repoman wrote: What if you mounted it like a hi-lift behind the spare
flip the spare mount and the extra space bolt the shovel on top behind the spare maybe use some of those rubber holders some of the guys here have for the mag lights That is a really good idea. If you could weld a piece of flat bar on the top of the tire carrier, after you flipped it, then drill holes in the flat bar and mount some quick fist grips to it and they could easily hod the shovel. There may even be room if you didn't flip it. I've had mine off for too long to remember the room that was or wasn't there. |
|
| Author: | 2003renegade [ Fri Oct 16, 2009 6:45 pm ] |
| Post subject: | |
hmm ya my brother is an ace welder is there a section for this type of thing? i was thinking about making something to go in the center cap hole. but i dont know.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|