LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Pic Request: Rear Bumpers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=49852 |
Page 1 of 1 |
Author: | Fulltimer [ Wed Feb 03, 2010 8:04 am ] |
Post subject: | Pic Request: Rear Bumpers |
I would like to see some pics of home made rear bumpers + ifo. on them. Terry |
Author: | yodejt02 [ Wed Feb 03, 2010 9:47 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=48641 heres what I did |
Author: | rescu2000 [ Sun Mar 21, 2010 12:34 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Here's some pics of a front and rear. I just added the little angled pieces at the bottom of the rear today. Made it look much better. I still need to smooth in some small holes and repaint it all. |
Author: | Xodius [ Mon Apr 19, 2010 5:33 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
So far I just removed mine and made the needed mods to the rear for the new one. I have no picts of the new one because I have not fabbed it up yet . Give me about...4 weeks. I should have more to report by then. |
Author: | Fulltimer [ Mon Apr 19, 2010 7:12 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
I'll be waiting. There are a lot of front bumper pics but not many of the rear. I appreciate the responses so far. Terry |
Author: | tommudd [ Mon Apr 19, 2010 9:08 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Try going to other sites like I8MUD, Expedition Portal etc, all have a ton of pics of rear bumpers that could be used as a basis for a KJ rear |
Author: | Fulltimer [ Tue Apr 20, 2010 5:23 am ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Thanks Tom, I'll check them out. Terry |
Author: | Xodius [ Tue Apr 20, 2010 3:47 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Hey Fultimer you on Facebook? I have a couple of pics there of the rear off and the cuts. Only thing I can say is if you use a plasma cutter for the cuts make sure you have some water On the passenger side my Father In Law made the cuts and it smoked a little, no biggie but when I got home it still smelled like something was burning or smoldering...there was, LO L. It was some spray foam the got a little too warm either from the Plasma or the Welds we did. *shrug* oh well. |
Author: | rescu2000 [ Thu Apr 22, 2010 7:51 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Here are some updated pics of mine with the new tire carrier I added last weekend. I've also added the bosses around the shackle mounts since the last time I posted up pics (I think)... |
Author: | Fulltimer [ Fri Apr 23, 2010 12:29 pm ] |
Post subject: | Re: Pic Request: Rear Bumpers |
Xodius wrote: Hey Fultimer you on Facebook? I have a couple of pics there of the rear off and the cuts. Only thing I can say is if you use a plasma cutter for the cuts make sure you have some water On the passenger side my Father In Law made the cuts and it smoked a little, no biggie but when I got home it still smelled like something was burning or smoldering...there was, LO L. It was some spray foam the got a little too warm either from the Plasma or the Welds we did. *shrug* oh well. PM sent. Terry |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |