LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

cutting stock rear bumper?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=50939
Page 1 of 1

Author:  qwert380 [ Thu Mar 11, 2010 10:51 pm ]
Post subject:  cutting stock rear bumper?

I know I remember seeing a write up on cutting the rear bumper but i can not seem to find it now.

could u guys point me in the right direction


thanks :banghead:

Author:  501 [ Thu Mar 11, 2010 11:54 pm ]
Post subject:  Re: cutting stock rear bumper?

Talk to Mudd, he did his first.!!!!!!!!!!!!!!!!!

Author:  long_tall_texan [ Fri Mar 12, 2010 12:00 am ]
Post subject:  Re: cutting stock rear bumper?

Here it is:
viewtopic.php?f=6&t=46877

And the follow up..
viewtopic.php?f=6&t=48919

I just did mine this week too:
Image

Author:  qwert380 [ Fri Mar 12, 2010 9:57 am ]
Post subject:  Re: cutting stock rear bumper?

can u give me an idea of how much u cut of the back


thanks
J

Author:  long_tall_texan [ Fri Mar 12, 2010 11:23 am ]
Post subject:  Re: cutting stock rear bumper?

Look at the pics in those threads at the rear of the Jeep. Just judge it by the license plate offset. That is what I did.

Author:  tommudd [ Fri Mar 12, 2010 11:48 am ]
Post subject:  Re: cutting stock rear bumper?

If you look at the fender flares behind the tire, I started right below the bottom rivit, and then went from there. I also moved my license plate up about an inch, cutting the top off some and drilling new holes in the plate. You can see in some of my pic's I think. If you need more pics I can take some more to help you do a Mudd's Bumper :wink:

Author:  qwert380 [ Fri Mar 12, 2010 12:59 pm ]
Post subject:  Re: cutting stock rear bumper?

tom, you are like google for KJs. :D

could you measure from the bottom of the spare indention to where you cut and give me that number. I cant wait to have a "Mudd bumper" :D

thanks

Josh

Author:  long_tall_texan [ Fri Mar 12, 2010 2:00 pm ]
Post subject:  Re: cutting stock rear bumper?

I started just below those Fender rivets too. Then on the rear, I cut it about 1/2" below the spare tire cutout. Use masking tape first to lay it all out to see what trim line you want. Easier to remove tape than to remove an accidental cut. :SOMBRERO:

Author:  qwert380 [ Tue Mar 16, 2010 11:56 pm ]
Post subject:  Re: cutting stock rear bumper?

i just finished cutting the rear bumper ill post pics tomorrow


thanks for all the help

Author:  tommudd [ Wed Mar 17, 2010 12:15 am ]
Post subject:  Re: cutting stock rear bumper?

Good job! Can't wait to see it!
Another mudderized bumper :ROTFL:

Author:  qwert380 [ Thu Mar 18, 2010 12:43 am ]
Post subject:  Re: cutting stock rear bumper?

i posted pics in the pics section

thanks

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/