LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Added angles and painted bumper, a skid and also rear lights
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=54632		 Page 1 of 2
Author:  BugginKJ [ Sat Jul 31, 2010 7:37 pm ]
Post subject:  Added angles and painted bumper, a skid and also rear lights
Image
Image
Image
Image
Image
Image
Image
I added angles to the sides of my front bumper I built, got rid of the bedliner and painted it black. Fabbed new front skid or radiator protector. Added 194 light sockets to the rear taillights in the bottom where they ae just reflectors. I plan on tomorrow to change them to the 3157 sockets so that they are marker and brake lights.
Author:  riptricket [ Sun Aug 01, 2010 2:29 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
WOW i love your bumper!
Author:  bugnout [ Sun Aug 01, 2010 11:18 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Nice job, Looks great

What are those marker lights in the front flairs?
Author:  501 [ Sun Aug 01, 2010 11:29 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
GREAT looking front bumper Buggin!
Author:  BugginKJ [ Sun Aug 01, 2010 12:33 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
riptricket wrote:
WOW i love your bumper!

Thank you very much :D
Author:  BugginKJ [ Sun Aug 01, 2010 12:35 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
bugnout wrote:
Nice job, Looks great

What are those marker lights in the front flairs?

Thank you very much :D
The lights in the side of the flairs are 3/4" LEDs markers.
Author:  BugginKJ [ Sun Aug 01, 2010 12:36 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
501 wrote:
GREAT looking front bumper Buggin!

Thank you very much :D
Author:  Combat Truck Monkey [ Sun Aug 01, 2010 6:37 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
That is a sharp looking bumper! I also love the front markers underneath the headlights!
Author:  BugginKJ [ Sun Aug 01, 2010 6:48 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Combat Truck Monkey wrote:
That is a sharp looking bumper! I also love the front markers underneath the headlights!

Thank you very much :D Those are also my turn signals, they stay lit when blinking and let me tell ya they are very bright. I also have resistors wired in so they flash normal.
Author:  Combat Truck Monkey [ Sun Aug 01, 2010 7:13 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
BugginKJ wrote:
Combat Truck Monkey wrote:
That is a sharp looking bumper! I also love the front markers underneath the headlights!

Thank you very much :D Those are also my turn signals, they stay lit when blinking and let me tell ya they are very bright. I also have resistors wired in so they flash normal.


That's even better! Good stuff!
Author:  infernicus [ Mon Aug 02, 2010 2:09 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
sweeeeeeeeeeeeet. 8)
Author:  bmrrwolfe [ Mon Aug 02, 2010 11:47 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Looks good!
I like that bumper, and the adding of the lights in the rear is cool idea :D
Any pictures of how the bumper mounts?
Author:  BugginKJ [ Mon Aug 02, 2010 11:57 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
infernicus wrote:
sweeeeeeeeeeeeet. 8)

8) Thank you
Author:  BugginKJ [ Mon Aug 02, 2010 12:03 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
bmrrwolfe wrote:
Looks good!
I like that bumper, and the adding of the lights in the rear is cool idea :D
Any pictures of how the bumper mounts?

8) Thank you.
Sorry no mounting pics. I may (more than likely) will be doing some "other" things to it in the near future so I can take pics then. The bumper is mounted through the crush cap holes. I have 2- 2"x2"x1/4" angles that are directly welded to the bumper that slide into the crush cap holes with 2- 7/8" grade 8 bolts on each side to secure it to the uniframe. I also have the nuts that the mounting bolts get secure with welded to the angle iron so that you just have to slide the bumper in, line up the holes and torque down the bolts. The d ring tabs are also directly welded to the angle iron, very stout for sure. :JEEPIN:
edit: I lied :P I found this one from when I was just starting to lay things out.
Image
Author:  BugginKJ [ Mon Aug 02, 2010 7:03 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
bmrrwolfe wrote:
Looks good!
I like that bumper, and the adding of the lights in the rear is cool idea :D
Any pictures of how the bumper mounts?

Don't credit me for the light idea, thank our brothers across the big pond :jester: By the way they are just 194's right now and I am changing them out to the 3157 socket so it is a taillight and brake light indentical to the upper. I was going to do that this weekend but got tied up with other things. I will post pics of the 3157 set up as soon as I switch them over. :JEEPIN:
Author:  BugginKJ [ Mon Aug 02, 2010 7:07 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
bugnout wrote:
Nice job, Looks great

What are those marker lights in the front flairs?

http://www.ledtrailerlights.com/cm/cm_M09300.htm
and here ya go :JEEPIN:
Author:  evil libby [ Mon Aug 02, 2010 9:43 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
nice look hart and I hop to get down and see you and larry and to give a hand in the motor
Author:  BugginKJ [ Tue Aug 03, 2010 2:23 am ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Thank you very much Mason 8)
Author:  Xodius [ Tue Aug 03, 2010 4:01 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Looks good! Keep up the good work.
Author:  KJWildman [ Tue Aug 03, 2010 4:29 pm ]
Post subject:  Re: Added angles and painted bumper, a skid and also rear li
Your bumper sucks!! It doesn't fit mine! :ROTFL:
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/