Yeah that looks sweet, I just don't have the fabrication expertise to craft something that intricate, nor do I have a welder
. I can pretty much fix anything that is broken. I just lack creative talent.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Light Bar on the cheap! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=5753 |
Page 1 of 1 |
| Author: | dano104 [ Sat Feb 11, 2006 3:55 pm ] |
| Post subject: | Light Bar on the cheap! |
I hope I'm not beating a dead horse. I need to come up with a way of running homemade/precutt bar ( for mounting lights of course ) across my 2 luggage racks. I'm on a fairly tight budget, and my access to tools is limited. It wouldn't have to be Heavy duty, just need it to mount 4 lights on. ( like other light bars on this site ) I am open to any suggestions, and they are all appreciated. |
|
| Author: | Kugellager [ Wed Feb 15, 2006 8:59 pm ] |
| Post subject: | |
Have you not seen my write-up on the light bar I made? My Light Bar Cost me about $30 in parts and $30 for the welding. If you can weld you can do it all for around $30 +/- probably less as I did a lot of futzing with the design before I settled on the final one you see in my pics. The $30 would not include the CB antenna mount nor the CB antenna of course....and not the lights of of course. John ];') |
|
| Author: | dano104 [ Wed Feb 15, 2006 11:14 pm ] |
| Post subject: | |
Yeah that looks sweet, I just don't have the fabrication expertise to craft something that intricate, nor do I have a welder . I can pretty much fix anything that is broken. I just lack creative talent.
|
|
| Author: | LibertyCRD [ Mon Feb 27, 2006 4:03 pm ] |
| Post subject: | |
What about angle iron? I wonder if a person could just use that common angle iron available at Home Depot and Lowes to make a light bar? |
|
| Author: | CaKJFreedom [ Mon Feb 27, 2006 6:47 pm ] |
| Post subject: | |
FreedomKJ used angle iron, u-bolts and lights from Harbor Frieght. Looks nice. |
|
| Author: | Kugellager [ Tue Feb 28, 2006 2:23 pm ] |
| Post subject: | |
All the metal I used were mild steel flats and square tubing from Home Depot...same stuff at Lowes. John ];') |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|