Has any one made a shelf and then sheeted it with metal? I put dirty running shoes in the back of my jeep... so I don't feel like cleaning fabric. I want tosheet metal it so that I can bedline it... could I do that to just wood though? I didn't think spraying on just wood would be a good idea. So I'm open for suggestions.
Might even tear out the fabric back there and bedline it too...

_________________
03 Sport - SEMI DIGGERIZED, Surco Rack with Daylighters, OME Lift, Runcool Hood Louvers, RL Front Bumper and Super Skink Sliders, 31" BFG AT/KO on Soft 8s, Skid Row/Mopar Skids, 8k Smittybilt Winch with Synthetic Line.
MY BUILD: viewtopic.php?f=3&t=59628

coat the plywood with herculiner. or poly then hurculiner

_________________
''Desert Ops Edition'' 03 jeep liberty light khaki
LTT gen1 CAI
Frankenlift 2 Premium full mopar skids front tow hooks
desert camo seats desert camo wraps
235/75/16 at's on MOABS
Monkey Farts

So you do think it will take to the wood and not cuase any problems down the wood?

_________________
03 Sport - SEMI DIGGERIZED, Surco Rack with Daylighters, OME Lift, Runcool Hood Louvers, RL Front Bumper and Super Skink Sliders, 31" BFG AT/KO on Soft 8s, Skid Row/Mopar Skids, 8k Smittybilt Winch with Synthetic Line.
MY BUILD: viewtopic.php?f=3&t=59628

yep got it on my jon boat for 5 years now, trust me i treat that thing like shuit

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

o yea... just make sure to scuff the wood up good and wipe all the dust off of it first

_________________
''Desert Ops Edition'' 03 jeep liberty light khaki
LTT gen1 CAI
Frankenlift 2 Premium full mopar skids front tow hooks
desert camo seats desert camo wraps
235/75/16 at's on MOABS
Monkey Farts

I'm not saying this is absolutely necessary, but I would recommend sealing the wood with epoxy first. That will seal the wood like nothing else and virtually any paint in the world will bind to it. If you go that route, check the epoxy manufacturers recommendations about how long to let it cure before painting.

p.s., I attempted to reply to this already, but must have hit the wrong button. So if two similar replies show up magically that's why.

_________________
2003 Liberty, ARB bumper w fogs and KC SlimLites
Front Franky II HD, rear OME948 w Rancho RS9000/XL shocks
LT245/75R16C Duratracs on Moabs
4.10 gears, front & rear ARB lockers, Boulder Bars, AFE Stage 2 intake
Surco rack w BajaRack jerry can holder
Cobra 75 WX ST

06 LJ Rubi, 3.5" RE SA and 33" BFG KM2s, GenRight tank

Ok so I plan on using the designs others on this site have used to build my shelf. However mine will have a twist! It will be getting bedlined, tie-downs, and the biggest mod of all, it will be getting sawed in half and hinges will be installed so that I can fold it. I some times put taller object in the back so this will come in handy. Hopefully it will support itself folded the same as normally extended, if it doesn't I guess ill have to mod a little more and add some support legs. If you have any tips id appreciate them! I plan on doing this two weekends from now!

_________________
03 Sport - SEMI DIGGERIZED, Surco Rack with Daylighters, OME Lift, Runcool Hood Louvers, RL Front Bumper and Super Skink Sliders, 31" BFG AT/KO on Soft 8s, Skid Row/Mopar Skids, 8k Smittybilt Winch with Synthetic Line.
MY BUILD: viewtopic.php?f=3&t=59628