I've found someone selling an old WJ bumper nearby. Anyone have any idea if it could be modified to fit an 05 KJ Renny? I have no skills in metal work myself but I could probably find a local shop. Is it worth it? I might be able to get it for a couple hundred bucks but I have know idea what the mods would cost to get it to fit my liberty. Anyone with info/experiece that can give me some ideas as to what's involved and possible costs?

Thanks in advance.

_________________
'05 Renny 6 speed
OME/Bilsteins, Spidertrax Wheel Spacers, Husky Liners all around, Gutter Guarded Grill, 1 ISO each side rear, Boilers top shims front. And a whole list of things yet to do.

Anything can be made to fit
but the thing is how will it look after its on.
not sure on width of body and frame mounting points matching up.
ARBs have a mounting bracket that bolts on first and then the outer "shell" mounts to that
so again get some measurements from it and go from there
Oh and is all of the mounting hardware with it?
I would buy it, clean it up some and if it won't work flip it,
make some money maybe

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Megalos i have tried calling that guy about that bumper and he has not picked up the phone or called me ack

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.