| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front Licence Plate Reciever Mount http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=5964 |
Page 1 of 1 |
| Author: | pipefactory [ Sun Feb 19, 2006 11:00 am ] |
| Post subject: | Front Licence Plate Reciever Mount |
Here is some pics of a licence plate bracket I fabricated to remount the licence plate back on after adding a hidden front hitch. I was thinking of having the local Jeep dealers send people to me to install front hitches & sell my plate adapter. http://www.cardomain.com/ride/2254161 2005 CRD Black Plow & 9500# Winch Front Hitch Custom Fabed 2" Receiver Licence Plate Bracket 3" billit lift 245/75-16" Bridgestone Rivo's. Predator Performance Module. Wifes 2004 Jeep Liberty Columbia Addition. Front Hitch 3" lift. Built by Me |
|
| Author: | dog_party [ Mon Feb 20, 2006 10:45 am ] |
| Post subject: | |
I'm glad you made a post about that custom bracket. I was going to comment on it in the middle of another topic, but I decided not to hijack. I don't currently have a front receiver, but I've been tossing a coin over and over again to decide on tow-hooks or front receiver. Having that cool front plate bracket thing would certainly weigh the receiver side of the coin. How much would you charge for the front plate bracket? Would it include the front plate hardware, or would you need that shipped from the buyer first? If so, what would the turnaround time be? |
|
| Author: | corwyyn [ Mon Feb 20, 2006 1:37 pm ] |
| Post subject: | |
There was another thread on here a few weeks back about the manufacturers discontinuing the front receivers for the Liberty, so if you are thinking along those lines you might want to call some retailers and verify that they are still in stock. |
|
| Author: | pipefactory [ Mon Feb 20, 2006 1:52 pm ] |
| Post subject: | |
dog_party wrote: I'm glad you made a post about that custom bracket. I was going to comment on it in the middle of another topic, but I decided not to hijack. I don't currently have a front receiver, but I've been tossing a coin over and over again to decide on tow-hooks or front receiver. Having that cool front plate bracket thing would certainly weigh the receiver side of the coin.
How much would you charge for the front plate bracket? Would it include the front plate hardware, or would you need that shipped from the buyer first? If so, what would the turnaround time be? Here is the web site I got my hitch from. They also sell a licence plate mount for $29 bucks but it is just a plate without the factory plastic backing and looks like the plate will sit lower. If you wish you could send me your plastic and if you baught the hitch from that site which should be the same as mine, I would make a clone from my Jeep for $35.00 plus shipping. I'm not out to make a buck (but won't turn it down either) and if you want I'll email you some more detailed pictures and you could fab your own. http://www.ontheball.com/front_end_hitches_jeep.htm 2005 CRD Black Plow & 9500# Winch Front Hitch Custom Fabed 2" Receiver Licence Plate Bracket 3" billit lift 245/75-16" Bridgestone Rivo's. Predator Performance Module. Wifes 2004 Jeep Liberty Columbia Addition. Front Hitch 3" lift. Built by Me |
|
| Author: | mozul [ Thu Feb 23, 2006 5:15 pm ] |
| Post subject: | My Fold Up Plate |
I have a reese hidden front receiver on my KJ. I just cut a hole in the front licence plate mount and put on a folding license plate holder over it. Here is the hitch without the holder 
I don't have a close up shot of the holder, but you can see it in this shot 
|
|
| Author: | dog_party [ Fri Feb 24, 2006 8:09 am ] |
| Post subject: | |
That's pretty slick Mozul! Thanks for sharing. It looks like you have tow hooks sticking out too. Are those attached to the Reese hitch? |
|
| Author: | Guest [ Fri Feb 24, 2006 9:48 am ] |
| Post subject: | |
dog_party wrote: That's pretty slick Mozul! Thanks for sharing. It looks like you have tow hooks sticking out too. Are those attached to the Reese hitch?
Those tow hooks(loops) are actually part of the Reese Hitch he installed. That is the reason I went for that, and only that, brand hitch. The tow loops are made of just over 6/10" diameter steel. I hung my shackle hooks off of them. Check it out... 
|
|
| Author: | lilmatty [ Fri Feb 24, 2006 11:27 am ] |
| Post subject: | Something even cheaper to use... |
I bought one of these: http://www.jcwhitney.com/autoparts/Product/tf-Browse/s-10101/Pr-p_Product.CATENTRY_ID:2004297/showCustom-0/p-2004297/N-111+10201+600002310/c-10101 bolted on my license plate and it's worked well for a long time. When wheelin' I just toss it in the back. With the reciever mounted winch it just slides onto the front of the winch mount. $10 and done. |
|
| Author: | dog_party [ Fri Feb 24, 2006 11:35 am ] |
| Post subject: | |
That's just too sweet! I must have that hitch!!! Thanks for posting that front-end shot AllJeep (I feel like I'm about to be run over). I was wondering how it would look on my 05 front end. Now I just have to find one. Reese doesn't list ANY hitches for the Liberty. Anyone know anyone who has these Reese hitches? And just to keep it on-topic...I'm going to fab the license plate bracket. Haven't decided on Pipefactory's idea, or Mozul's. Just have to figure that out after I install the receiver. |
|
| Author: | Guest [ Fri Feb 24, 2006 11:52 am ] |
| Post subject: | |
dog_party wrote: That's just too sweet! I must have that hitch!!! Thanks for posting that front-end shot AllJeep (I feel like I'm about to be run over). I was wondering how it would look on my 05 front end. Now I just have to find one. Reese doesn't list ANY hitches for the Liberty. Anyone know anyone who has these Reese hitches?
And just to keep it on-topic...I'm going to fab the license plate bracket. Haven't decided on Pipefactory's idea, or Mozul's. Just have to figure that out after I install the receiver. Check out this thread: http://www.lostjeeps.com/forum/phpBB3/vie ... ront+hitch I have a post with a link in there that still works. Another guy in the thread used it as well. It's for DrawTite, but the company is now taken over by Reese so they cross reference to another part number. It's for the '02 model year. Anything '02-'04 will also fit our '05. $104 !!! And yeah, the picture is cool - the only way to make the Liberty look that big is to put the digital camera on the ground and tilt it up a little !! 
|
|
| Author: | dog_party [ Fri Feb 24, 2006 12:49 pm ] |
| Post subject: | |
Reese hitch ordered. Thanks for the links and the picts and the ideas. Can't beat $104 for THAT! That's only a couple bucks more than a set of Mopar tow hooks!! Now I just need to fabricate something to stay on topic. 
|
|
| Author: | Myke [ Thu Mar 16, 2006 4:33 pm ] |
| Post subject: | |
alljeep wrote: dog_party wrote: That's pretty slick Mozul! Thanks for sharing. It looks like you have tow hooks sticking out too. Are those attached to the Reese hitch? Those tow hooks(loops) are actually part of the Reese Hitch he installed. That is the reason I went for that, and only that, brand hitch. The tow loops are made of just over 6/10" diameter steel. I hung my shackle hooks off of them. Check it out... Thats awsome can you still purchase them? |
|
| Author: | dog_party [ Thu Mar 16, 2006 4:55 pm ] |
| Post subject: | |
Sorry, I should have come full circle on this thread. I ordered from hitchfinder.com (aka draw-titehitches.com) just waiting for the online interface to tell me that they didn't have any. But they didn't, so I ordered. The next day I got an email that said "there is a problem with your order, we do not have these in stock and the manufacturer does not make them any more, please call us." So I called them and the CSR told me, pretty much the same thing the email had said. Don't have them, can't get them. We sat there in silence for a while, then I said, "Well, what CAN you do?" So she put me on hold for about 10 minutes or so, then finally comes back on, thanks me for my patience, then tells me they found one in the CA warehouse. It'll take a bit longer to get to me, but it'll get to me. They changed their website within an hour. It now states that there are no front receivers available for the KJ. I figure they've found one that doesn't have the tow loops and they're sending that to me. But a box appeared on my porch last night and I ripped it open like it was Christmas day BAM tow loops and on my big ol' Reese hitch. |
|
| Author: | 0311_DoC [ Thu Mar 16, 2006 6:16 pm ] |
| Post subject: | |
alljeep wrote: dog_party wrote: That's just too sweet! I must have that hitch!!! Thanks for posting that front-end shot AllJeep (I feel like I'm about to be run over). I was wondering how it would look on my 05 front end. Now I just have to find one. Reese doesn't list ANY hitches for the Liberty. Anyone know anyone who has these Reese hitches? And just to keep it on-topic...I'm going to fab the license plate bracket. Haven't decided on Pipefactory's idea, or Mozul's. Just have to figure that out after I install the receiver. Check out this thread: http://www.lostjeeps.com/forum/phpBB3/vie ... ront+hitch I have a post with a link in there that still works. Another guy in the thread used it as well. It's for DrawTite, but the company is now taken over by Reese so they cross reference to another part number. It's for the '02 model year. Anything '02-'04 will also fit our '05. $104 !!! And yeah, the picture is cool - the only way to make the Liberty look that big is to put the digital camera on the ground and tilt it up a little !! I wonder if that same one will fit my 06 ? |
|
| Author: | Se7enLC [ Thu Mar 16, 2006 6:28 pm ] |
| Post subject: | |
0311_DoC wrote: I wonder if that same one will fit my 06 ? It should - 05s and 06s are the same in that area, AFAIK |
|
| Author: | waddy whiteguts [ Sat Mar 18, 2006 11:54 pm ] |
| Post subject: | |
Glad I bought my Reese when I did, nice piece of harware. I still have to install it when it warms up. I like the front plate ideas, I need to address that too. Pipefactory, I see WI plates in those pics, what part of the state are you from? |
|
| Author: | pipefactory [ Sun Mar 19, 2006 8:44 am ] |
| Post subject: | |
waddy whiteguts wrote: Glad I bought my Reese when I did, nice piece of harware. I still have to install it when it warms up. I like the front plate ideas, I need to address that too. Pipefactory, I see WI plates in those pics, what part of the state are you from?
I'm in Superior. The only CRD in the area I believe. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|