Interesting product for the JK, like to make one for my KJ

bugnout · **Posted:** Tue Mar 29, 2011 12:33 am

http://www.vectoroffroad.com/product_info.php?products_id=28&osCsid=8g5etohi0gafbqfi72hvjf2vr0/

I think the edock is a great idea. use motorcycle/ATV handlebar mounts for all your devices. Won't run out of places to mount your gadgets.

Couldn't use a straight bar in the KJ, would need to roll the bar to match the curve of the defrost/speaker panel up against the window. I like the tray, put a loop right over the vents.

We don't have any exposed mounting points, probably need to cut that plastic panel to reach the underlying mounting bolts.

tommudd · **Posted:** Tue Mar 29, 2011 2:14 pm

really should not be too bad to mock up one.
Use conduit for the first one
mmmm never mind giving away too many ideas
:ROTFL:

bugnout · **Posted:** Tue Mar 29, 2011 3:45 pm

tommudd wrote:

mmmm never mind giving away too many ideas
:ROTFL:

Too late. I'm on it.

CoopaTroopa · **Posted:** Wed Mar 30, 2011 9:30 pm

hmmm its intersting to say the least... I'd have to see what you come up with :twisted:

jmichaelsjeep · **Posted:** Fri Apr 01, 2011 11:23 am

Hey, you just gave me a great idea for my netbook mount!!

STINGN · **Posted:** Fri Apr 01, 2011 1:57 pm

i saw this site a while ago and i really want to make that bench for the rear of my door like they have but i never really had the time for it

STINGN · **Posted:** Wed Apr 06, 2011 2:33 pm

so scott...whatcha thinking...I was drawing in my notebook during class and drew this with the kj...oooo how nice it would be

bunkermonkeycw · **Posted:** Wed Apr 06, 2011 4:57 pm

Net book mount? when I get my laptop stand out of storage I'll show you what I got. Unless your passenger is really |____Wide_____| it works great!

bunkermonkeycw · **Posted:** Wed Apr 06, 2011 4:59 pm

Ohh, and that dash idea, Golden. You have my attention.

jimymc · **Joined:** Thu Dec 17, 2009 7:51 pm **Posts:** 248

Yeah... I'd sure like to have one, too. :BANANA:

bunkermonkeycw · **Posted:** Thu Apr 07, 2011 2:43 am

mmmmmm, auxiliary gadgets...

DocGary · **Posted:** Mon Jan 23, 2012 5:24 pm

I really like this idea. May have to come up with something for my '05 LTD

schmidt0403 · **Posted:** Wed Feb 15, 2012 10:14 pm

I started making one a few weeks ago... still a work in progress...

needs 2 mounts to the radio sub frame and paint. The goal is to have a place for switchs, 2 roll bar guage mounts and a few ram mounts on the bar.

bugnout · **Posted:** Thu Feb 16, 2012 11:35 am

Very Nice!

Square bar for switches? where do you plan to mount Gauges?

How far do does that square bar extend out from the bar?

schmidt0403 · **Posted:** Thu Feb 16, 2012 5:41 pm

Its really a bent piece of flat stock into a box for the switch panel, and the tubes coming out extend 6 inches, the total distance from the dash panel edge is 7 inches.

schmidt0403 · **Posted:** Thu Feb 16, 2012 8:34 pm

I forgot to answer the question about the guages... my bad. I used 1 1/2 inch tube that can have a roll cage guage mount attached. it's on the passanger side for now, I will be flipping it over next time it is out.

schmidt0403 · **Posted:** Fri Feb 24, 2012 4:42 pm

Lower mount installed.

I just need to modify the dash cover to accept the spring clips and not push up the cover anymore, then paint.

Zack A · **Posted:** Fri Mar 30, 2012 7:05 am

Looks good...

bunkermonkeycw · **Posted:** Thu Apr 26, 2012 10:08 pm

Been eyeing some brackets at work for the server rack systems that would make excellent starts for this, :rockon:

WHITE the civilian · **Posted:** Mon Dec 22, 2014 6:04 am

A dash mount bar will probably be the first thing I fab up. I'm thinking of some trunk window cage mounts as well for added storage.

Interesting product for the JK, like to make one for my KJ

Who is online