LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Interesting product for the JK, like to make one for my KJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=59764 |
Page 1 of 1 |
Author: | bugnout [ Tue Mar 29, 2011 12:33 am ] |
Post subject: | Interesting product for the JK, like to make one for my KJ |
http://www.vectoroffroad.com/product_info.php?products_id=28&osCsid=8g5etohi0gafbqfi72hvjf2vr0/ I think the edock is a great idea. use motorcycle/ATV handlebar mounts for all your devices. Won't run out of places to mount your gadgets. Couldn't use a straight bar in the KJ, would need to roll the bar to match the curve of the defrost/speaker panel up against the window. I like the tray, put a loop right over the vents. We don't have any exposed mounting points, probably need to cut that plastic panel to reach the underlying mounting bolts. |
Author: | tommudd [ Tue Mar 29, 2011 2:14 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
really should not be too bad to mock up one. Use conduit for the first one mmmm never mind giving away too many ideas |
Author: | bugnout [ Tue Mar 29, 2011 3:45 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
tommudd wrote: mmmm never mind giving away too many ideas Too late. I'm on it. |
Author: | CoopaTroopa [ Wed Mar 30, 2011 9:30 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
hmmm its intersting to say the least... I'd have to see what you come up with |
Author: | jmichaelsjeep [ Fri Apr 01, 2011 11:23 am ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Hey, you just gave me a great idea for my netbook mount!! |
Author: | STINGN [ Fri Apr 01, 2011 1:57 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
i saw this site a while ago and i really want to make that bench for the rear of my door like they have but i never really had the time for it |
Author: | STINGN [ Wed Apr 06, 2011 2:33 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
so scott...whatcha thinking...I was drawing in my notebook during class and drew this with the kj...oooo how nice it would be |
Author: | bunkermonkeycw [ Wed Apr 06, 2011 4:57 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Net book mount? when I get my laptop stand out of storage I'll show you what I got. Unless your passenger is really |____Wide_____| it works great! |
Author: | bunkermonkeycw [ Wed Apr 06, 2011 4:59 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Ohh, and that dash idea, Golden. You have my attention. |
Author: | jimymc [ Wed Apr 06, 2011 6:08 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Yeah... I'd sure like to have one, too. |
Author: | bunkermonkeycw [ Thu Apr 07, 2011 2:43 am ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
mmmmmm, auxiliary gadgets... |
Author: | DocGary [ Mon Jan 23, 2012 5:24 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
I really like this idea. May have to come up with something for my '05 LTD |
Author: | schmidt0403 [ Wed Feb 15, 2012 10:14 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
I started making one a few weeks ago... still a work in progress... needs 2 mounts to the radio sub frame and paint. The goal is to have a place for switchs, 2 roll bar guage mounts and a few ram mounts on the bar. |
Author: | bugnout [ Thu Feb 16, 2012 11:35 am ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Very Nice! Square bar for switches? where do you plan to mount Gauges? How far do does that square bar extend out from the bar? |
Author: | schmidt0403 [ Thu Feb 16, 2012 5:41 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Its really a bent piece of flat stock into a box for the switch panel, and the tubes coming out extend 6 inches, the total distance from the dash panel edge is 7 inches. |
Author: | schmidt0403 [ Thu Feb 16, 2012 8:34 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
I forgot to answer the question about the guages... my bad. I used 1 1/2 inch tube that can have a roll cage guage mount attached. it's on the passanger side for now, I will be flipping it over next time it is out. |
Author: | schmidt0403 [ Fri Feb 24, 2012 4:42 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Lower mount installed. I just need to modify the dash cover to accept the spring clips and not push up the cover anymore, then paint. |
Author: | Zack A [ Fri Mar 30, 2012 7:05 am ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Looks good... |
Author: | bunkermonkeycw [ Thu Apr 26, 2012 10:08 pm ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
Been eyeing some brackets at work for the server rack systems that would make excellent starts for this, |
Author: | WHITE the civilian [ Mon Dec 22, 2014 6:04 am ] |
Post subject: | Re: Interesting product for the JK, like to make one for my |
A dash mount bar will probably be the first thing I fab up. I'm thinking of some trunk window cage mounts as well for added storage. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |