LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Interesting product for the JK, like to make one for my KJ
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=59764		 Page 1 of 1
Author:  bugnout [ Tue Mar 29, 2011 12:33 am ]
Post subject:  Interesting product for the JK, like to make one for my KJ
Image
Image
http://www.vectoroffroad.com/product_info.php?products_id=28&osCsid=8g5etohi0gafbqfi72hvjf2vr0/

I think the edock is a great idea. use motorcycle/ATV handlebar mounts for all your devices. Won't run out of places to mount your gadgets.

Couldn't use a straight bar in the KJ, would need to roll the bar to match the curve of the defrost/speaker panel up against the window. I like the tray, put a loop right over the vents.

We don't have any exposed mounting points, probably need to cut that plastic panel to reach the underlying mounting bolts.
Author:  tommudd [ Tue Mar 29, 2011 2:14 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
really should not be too bad to mock up one.
Use conduit for the first one
mmmm never mind giving away too many ideas
:ROTFL:
Author:  bugnout [ Tue Mar 29, 2011 3:45 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
tommudd wrote:
mmmm never mind giving away too many ideas
:ROTFL:


Too late. I'm on it. :)
Author:  CoopaTroopa [ Wed Mar 30, 2011 9:30 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
hmmm its intersting to say the least... I'd have to see what you come up with :twisted:
Author:  jmichaelsjeep [ Fri Apr 01, 2011 11:23 am ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Hey, you just gave me a great idea for my netbook mount!!
Author:  STINGN [ Fri Apr 01, 2011 1:57 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
i saw this site a while ago and i really want to make that bench for the rear of my door like they have but i never really had the time for it
Author:  STINGN [ Wed Apr 06, 2011 2:33 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
so scott...whatcha thinking...I was drawing in my notebook during class and drew this with the kj...oooo how nice it would be
Author:  bunkermonkeycw [ Wed Apr 06, 2011 4:57 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Net book mount? when I get my laptop stand out of storage I'll show you what I got. Unless your passenger is really |____Wide_____| it works great!
Author:  bunkermonkeycw [ Wed Apr 06, 2011 4:59 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Ohh, and that dash idea, Golden. You have my attention.
Author:  jimymc [ Wed Apr 06, 2011 6:08 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Yeah... I'd sure like to have one, too. :BANANA:
Author:  bunkermonkeycw [ Thu Apr 07, 2011 2:43 am ]
Post subject:  Re: Interesting product for the JK, like to make one for my
mmmmmm, auxiliary gadgets...
Author:  DocGary [ Mon Jan 23, 2012 5:24 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
I really like this idea. May have to come up with something for my '05 LTD
Author:  schmidt0403 [ Wed Feb 15, 2012 10:14 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
I started making one a few weeks ago... still a work in progress...Image

needs 2 mounts to the radio sub frame and paint. The goal is to have a place for switchs, 2 roll bar guage mounts and a few ram mounts on the bar.
Author:  bugnout [ Thu Feb 16, 2012 11:35 am ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Very Nice!

Square bar for switches? where do you plan to mount Gauges?

How far do does that square bar extend out from the bar?
Author:  schmidt0403 [ Thu Feb 16, 2012 5:41 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Its really a bent piece of flat stock into a box for the switch panel, and the tubes coming out extend 6 inches, the total distance from the dash panel edge is 7 inches.
Author:  schmidt0403 [ Thu Feb 16, 2012 8:34 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
I forgot to answer the question about the guages... my bad. I used 1 1/2 inch tube that can have a roll cage guage mount attached. it's on the passanger side for now, I will be flipping it over next time it is out.
Author:  schmidt0403 [ Fri Feb 24, 2012 4:42 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Lower mount installed.

Image

I just need to modify the dash cover to accept the spring clips and not push up the cover anymore, then paint.
Author:  Zack A [ Fri Mar 30, 2012 7:05 am ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Looks good...
Author:  bunkermonkeycw [ Thu Apr 26, 2012 10:08 pm ]
Post subject:  Re: Interesting product for the JK, like to make one for my
Been eyeing some brackets at work for the server rack systems that would make excellent starts for this, :rockon:
Author:  WHITE the civilian [ Mon Dec 22, 2014 6:04 am ]
Post subject:  Re: Interesting product for the JK, like to make one for my
A dash mount bar will probably be the first thing I fab up. I'm thinking of some trunk window cage mounts as well for added storage.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/