| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| TJ bumper mod http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=62729 |
Page 5 of 5 |
| Author: | TheBlueKJ [ Wed Feb 05, 2014 10:42 am ] |
| Post subject: | Re: TJ bumper mod |
Well I was going to make my own rear bumper and use the hitch mounting points to mount it to. Now for the front how did you go about doing that? Drill holes in the frame rail and mount it up like the rear hitch is? |
|
| Author: | blackwidowkj06 [ Wed Feb 05, 2014 12:23 pm ] |
| Post subject: | Re: TJ bumper mod |
I used the unibody pockets. They covered up by metal caps. Cut the opening a little bigger and used 3/16th 2x2 square steel. Mounted that inside the pocket and bolted down with grade 8 bolts. Drilled holes on the square tubing sticking out to mount the bumper |
|
| Author: | TheBlueKJ [ Wed Feb 05, 2014 6:10 pm ] |
| Post subject: | Re: TJ bumper mod |
Ok so did you weld in a nut onto the square tubing to make bolting it on that much easier or did you just fish around in there until it was bolted up? |
|
| Author: | blackwidowkj06 [ Wed Feb 05, 2014 9:25 pm ] |
| Post subject: | Re: TJ bumper mod |
Held it in place with a magnet over the bolt hole inside Threaded the bolt through the nut until it was on there good enough Then used a socket wrench to tighten it up |
|
| Author: | candpliberty [ Wed Feb 05, 2014 10:47 pm ] |
| Post subject: | Re: TJ bumper mod |
I used a coat hanger tacked ro the nut. |
|
| Author: | TheBlueKJ [ Thu Feb 06, 2014 8:09 pm ] |
| Post subject: | Re: TJ bumper mod |
Now there's some innovation |
|
| Author: | candpliberty [ Thu Feb 06, 2014 10:43 pm ] |
| Post subject: | Re: TJ bumper mod |
I wanted some wiggle room that I wouldn't have had if I welded the nut on. |
|
| Page 5 of 5 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|