| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ARB compressor Stand http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=69677 |
Page 1 of 1 |
| Author: | audiboy86 [ Sun Jul 22, 2012 7:16 pm ] |
| Post subject: | ARB compressor Stand |
I made this at work during my spare time and some left over material and believe me it is stout.   The plate mounted to the compressor is fully adjustable I just can't figure out if I want to flip it and put the breathers on top. The only problem is I will have to drill a hole in my mount to pass the wire through. |
|
| Author: | CoopaTroopa [ Sun Jul 22, 2012 7:43 pm ] |
| Post subject: | Re: ARB compressor Stand |
Where are you mounting it? |
|
| Author: | audiboy86 [ Sun Jul 22, 2012 8:29 pm ] |
| Post subject: | Re: ARB compressor Stand |
Off my AllJ rack in the passenger side window I should have it mounted by the end of the week hopefully. |
|
| Author: | candpliberty [ Wed Aug 01, 2012 1:20 pm ] |
| Post subject: | Re: ARB compressor Stand |
Looks like crazy overkill but hey, the price was right. Looks very cool. Probably doesn't weigh very much. |
|
| Author: | audiboy86 [ Sat Aug 04, 2012 1:30 pm ] |
| Post subject: | Re: ARB compressor Stand |
The price for me was free and yes it is all of about 10 pounds closer to 30 with the compressor though. |
|
| Author: | candpliberty [ Sat Aug 04, 2012 1:39 pm ] |
| Post subject: | Re: ARB compressor Stand |
Maybe you can bandsaw it right down the middle of each piece and make 2 mounts out of it 
|
|
| Author: | audiboy86 [ Sat Aug 04, 2012 1:42 pm ] |
| Post subject: | Re: ARB compressor Stand |
Nah I like the extra bulk it makes me feel better with how exspensive the compressor is. But I can probably build a few more before I change jobs. |
|
| Author: | candpliberty [ Sat Aug 04, 2012 1:48 pm ] |
| Post subject: | Re: ARB compressor Stand |
 lol!
|
|
| Author: | METCRD [ Sat Aug 04, 2012 8:22 pm ] |
| Post subject: | Re: ARB compressor Stand |
8020...... Nice..... |
|
| Author: | audiboy86 [ Mon Aug 06, 2012 6:34 pm ] |
| Post subject: | Re: ARB compressor Stand |
Nope I work for a company called item southeast and this material is made by a German company called item. It is the grandfather of 8020. |
|
| Author: | CoopaTroopa [ Mon Aug 06, 2012 9:07 pm ] |
| Post subject: | Re: ARB compressor Stand |
I almost thought you were being sarcastic with the names, then I googled it 
|
|
| Author: | candpliberty [ Mon Aug 06, 2012 9:20 pm ] |
| Post subject: | Re: ARB compressor Stand |
LOL, i did too! |
|
| Author: | audiboy86 [ Mon Aug 06, 2012 9:45 pm ] |
| Post subject: | Re: ARB compressor Stand |
You would be surprised how many people I have talked to about the stuff that probably wonder the same thing. But no I wasn't being sarcastic I promise. Air craft grade extruded Aluminium with a custom fastening system to meet anybody needs. Have I mentioned the sales men spend alot of time on the work floor with us. 
|
|
| Author: | audiboy86 [ Tue Sep 11, 2012 12:27 pm ] |
| Post subject: | Re: ARB compressor Stand |
Changed jobs here recently so not alot of keep wrench time but here is the mounted finished product.   I don't get any rattling or seem to have any obstruction in my rear view. Plus with the heavily tinted windows in the rear no one even knows it is back there. |
|
| Author: | candpliberty [ Tue Sep 11, 2012 12:48 pm ] |
| Post subject: | Re: ARB compressor Stand |
That's so different. I like it.  Matter of fact it is good use of dead space. I've seen people put fire extinguishers horizontally but that way it doesn't utilize all the space. Is all the weight on the rack/shelf? Is the rack/shelf removable?
|
|
| Author: | audiboy86 [ Tue Sep 11, 2012 5:18 pm ] |
| Post subject: | Re: ARB compressor Stand |
It is to bolts and stand and compressor come off and all the wieght is spread across one side of the rack. As you can see from the aluminum plates bolted through the sides of the rack spreading the wieght. I have been driving with it like that for about 2 days trying to see if it will rattle or move none so far. |
|
| Author: | candpliberty [ Tue Sep 11, 2012 5:45 pm ] |
| Post subject: | Re: ARB compressor Stand |
I don't that will EVER move or rattle! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|