A few dollars of stainless hardware and I have a very sturdy Hi-Lift mount! The large spacer looking thing is a shaft collar with a set screw to hold the bolt in place and the rubber is a piece of 3/8" hose.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hi-Lift mount on roof rack http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=7186 |
Page 1 of 1 |
| Author: | libby [ Thu Mar 30, 2006 3:46 pm ] |
| Post subject: | Hi-Lift mount on roof rack |
A few dollars of stainless hardware and I have a very sturdy Hi-Lift mount! The large spacer looking thing is a shaft collar with a set screw to hold the bolt in place and the rubber is a piece of 3/8" hose.
|
|
| Author: | kevh [ Fri Mar 31, 2006 1:54 pm ] |
| Post subject: | |
may want to drill a hole through the end of the bolt and slide a small hitch pin through it. that way it cant come unscrewed. would really suck for that to come unscrewed going down the road. even if it was just one end it would seriously put a damper on your day |
|
| Author: | lilmatty [ Fri Mar 31, 2006 4:23 pm ] |
| Post subject: | |
I did the same rig except I used come J-bolts and therefore did not need to drill a hole in my rack. I dipped the hook end of the J-bolt in that goop you use to insulate tool handles with. |
|
| Author: | CaKJFreedom [ Fri Mar 31, 2006 6:26 pm ] |
| Post subject: | |
I know you have a camera, so where are some pictures so the other folks can see your set up? 
By the way, I admire you crafty folks. |
|
| Author: | DispatchedKJ [ Sat Apr 01, 2006 4:32 am ] |
| Post subject: | |
looks nice |
|
| Author: | riptricket [ Mon Apr 03, 2006 11:18 pm ] |
| Post subject: | |
what kind of roof rack is that there? and how much did you pay for it? |
|
| Author: | libby [ Thu Apr 06, 2006 8:18 pm ] |
| Post subject: | |
Made it myself! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=5677 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|