Ok I've had my Libby for about 6 months now I've had to put three new a-arm supports on it. I was just wondering if the Libby's had a-arm support problems or is it a result from back roading.

Thanks in advance~Randy

Ok thanks I think my problem is I buy the cheap ones since I don't have a hole lot of money, so I think I'm just going to man up and get a good one.

I got a 04 Jeep liberty and the rubber bushing keep going bad to fast and there is no other mods than the sway bar. And I usually go every Friday after school and sometimes throughout the weekend.

I got a 04 Jeep liberty and the rubber bushing keep going bad to fast and there is no other mods than the sway bar. And I usually go every Friday after school and sometimes throughout the weekend.

Could you post some pics of exactly what you are having problems with?
I have an 03 and haven't had any problems with bushings yet (174,000 miles)

hmm, I wonder why it goes bad that fast. I have a 2012 kk and when I removed my bushings they were pretty torn up after only 20k miles. I now have poly bushings on it with grease zerks. so far its going good. maybe some other members will shed some light on this issue as my only solution to this would be using the poly bushings and re torqueing the bolts.

and you really shouldn't skimp on suspension parts. if one part breaks, it wont be pretty. that being said, I have a spacer lift. so I guess I should listen to my own words.

try out these bushings:

http://www.amazon.com/Daystar-KJ05014BK-Front-Sway-Bushing/dp/B004IARQCI/ref=sr_1_sc_2?ie=UTF8&qid=1418918362&sr=8-2-spell&keywords=2004+jep+liberty+sway+bar+bushing

try this out for your issue:

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=76174&hilit=sway+bar+bushing

Buddiiee, they last a long time, but do squeak.