LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
JK Winch Bumper On KJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=84724 |
Page 1 of 1 |
Author: | projectkj [ Sat Jun 04, 2016 3:27 pm ] |
Post subject: | JK Winch Bumper On KJ |
lots of fab to make it work, bumper came unwelded.. |
Author: | G.O.A.T. [ Sat Jun 04, 2016 9:32 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
Looks good actually. Kinda like mine. But one thing. I WOULDN'T weld the mounts to the unibody. I have made a few bumpers in my short lifetime and thats not the way to do it. But I like it either way. Sent from my SM-N900P using Tapatalk |
Author: | G.O.A.T. [ Sat Jun 04, 2016 9:33 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
Heres mine. I like the stubby look. Sent from my SM-N900P using Tapatalk |
Author: | G.O.A.T. [ Sat Jun 04, 2016 9:44 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
One of these days I will do a write up on how to build a front and rear bumper. But. Sorry for the hijacking. Sent from my SM-N900P using Tapatalk |
Author: | riptricket [ Sun Jun 05, 2016 10:43 am ] |
Post subject: | Re: JK Winch Bumper On KJ |
Either way... Badass Where'd you get the front led markers/turn signal? |
Author: | projectkj [ Sun Jun 05, 2016 2:38 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
riptricket wrote: Either way... Badass Where'd you get the front led markers/turn signal? Princess Auto, $8 each |
Author: | projectkj [ Sun Jun 05, 2016 2:39 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
G.O.A.T. wrote: Looks good actually. Kinda like mine. But one thing. I WOULDN'T weld the mounts to the unibody. I have made a few bumpers in my short lifetime and thats not the way to do it. But I like it either way. Sent from my SM-N900P using Tapatalk There is a 3/4 bolt through the welded frame plating and the original frame.... |
Author: | projectkj [ Sun Jun 05, 2016 2:47 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
G.O.A.T. wrote: Looks good actually. Kinda like mine. But one thing. I WOULDN'T weld the mounts to the unibody. I have made a few bumpers in my short lifetime and thats not the way to do it. But I like it either way. Sent from my SM-N900P using Tapatalk didnt upload this, but the painted over bolt it through the welded on plate right through the stock kj frame there is so much plating that i doubt anything would happen, but the bolt through was insurance..... |
Author: | TKB4 [ Sun Jun 05, 2016 3:19 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
Did You move the windshield washer fluid bottle? From pic looks like it would be visible if not relocated. If you moved it where to? Or changed to another one? |
Author: | projectkj [ Sun Jun 05, 2016 8:30 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
TKB4 wrote: Did You move the windshield washer fluid bottle? From pic looks like it would be visible if not relocated. If you moved it where to? Or changed to another one? moved it into the engine bay, extended all the electrical lines, cut the throat of the bottle... re-glued it, what you see is 10lbs in weight holdind down the washer fill neck lid as i cut and shortened it, and still wanted to keep the stock cap |
Author: | TKB4 [ Mon Jun 06, 2016 4:08 am ] |
Post subject: | Re: JK Winch Bumper On KJ |
Looks like a tight fit glad you figured out how to do it I wondered where you could put the stock one with such a long neck on it. Was wondering because after I put 32.3 inch tires on mine once hit a big bump and tire rubbed pump wiring a little and was looking for a way to move it. Thanks! , pic helped a lot. I was thinking of that area for one from another vehicle hadn't considered cutting neck down |
Author: | KJ/toy [ Mon Jun 06, 2016 9:57 am ] |
Post subject: | Re: JK Winch Bumper On KJ |
G.O.A.T. wrote: Heres mine. I like the stubby look. Sent from my SM-N900P using Tapatalk Looking good...... |
Author: | G.O.A.T. [ Wed Jun 08, 2016 12:08 pm ] |
Post subject: | Re: JK Winch Bumper On KJ |
I cut the unibody "horn" off with the plasma cutter. Still waiting on it to fall apart doing 75 down the highway. Sent from my "smart phone" using Tapatalk, waiting on the "Ban Hammer" |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |