Custom rear hitch rack , 1/8" steel plate and angle, lots of grade 8 bolts and nylocks, and many muffler clamps for tie downs
Sent from my HTC Desire 510 using Tapatalk
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bush Joey Rack http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=84920 |
Page 1 of 1 |
| Author: | Bushman5 [ Wed Jul 06, 2016 10:13 pm ] |
| Post subject: | Bush Joey Rack |
Custom rear hitch rack , 1/8" steel plate and angle, lots of grade 8 bolts and nylocks, and many muffler clamps for tie downs Sent from my HTC Desire 510 using Tapatalk |
|
| Author: | Bushman5 [ Wed Jul 06, 2016 10:15 pm ] |
| Post subject: | Re: Bush Joey Rack |
 Sent from my HTC Desire 510 using Tapatalk |
|
| Author: | Bushman5 [ Sun Jul 17, 2016 2:28 pm ] |
| Post subject: | Re: Bush Joey Rack |
  I'd say about 500 lbs max. It's pretty overbuilt. However my hitch tongue max rating load is only 350 lbs. Mostly I carry my chainsaw and water cans it. This little tab is a sideplate from a harverster chain. I put my main tarp pole in it when camping. Though I might mount a flood light there ......  1/8" steel plate and 1"x1/8" angle make this rack bomber tough. No flex. Complete rigidity.  Grade 8 bolts, washers and Nylock nuts and red loctite keep it together. Main tray to hitch tubing bolts are 3/8" grade 8 and they go right trhu . Again locktite and nylocks. Sent from my HTC Desire 510 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|