LOST JEEPS :: View topic - Putting a feeler out there......

I want a rack that is very low profile and hugs the curvature of the roof, so that I can still fit everywhere I can with my stock rails and cross bars (most importantly my garage!!)

So whos gonna make it ??? Any welders out there interested in helping out ???

I can only have another 4 inches above my stock rails at most and still fit in my garage, and I don't think any roof rack mounted on the aftermarket crossbars would fit under that limitation. I've been looking into somehow mounting a roof rack in between the stock bars.

This was my idea that kinda goes along with that:

I want a rack that is very low profile and hugs the curvature of the roof, so that I can still fit everywhere I can with my stock rails and cross bars (most importantly my garage!!)

Hmm, don't know about the Xterra rack - I have a buddy with an '02 X and I've looked at it quite a bit to see if I could do something for mine. I think you'd wind up havning to drill into the roof to make it work.

Pixeldzn, are you designing yours to fit in between the existing rails or replace them all togther?

corwyyn wrote:

Replacing the rails all together. This thing is gonna HUG the roof- say 1-2 inches above it max.

Still looking for a fabricator without much success.

Author:	0311_DoC [ Mon May 15, 2006 3:12 pm ]
Post subject:	Putting a feeler out there......
To all you fabricating gurus, can an OEM Xterra roof rail/rack sytem be made to fit on top of the KJ?

Author:	pixeldzn [ Mon May 15, 2006 5:16 pm ]
Post subject:
This was my idea that kinda goes along with that: I want a rack that is very low profile and hugs the curvature of the roof, so that I can still fit everywhere I can with my stock rails and cross bars (most importantly my garage!!)

Author:	RespectMyLibertay [ Wed May 17, 2006 2:07 am ]
Post subject:
pixeldzn wrote: I want a rack that is very low profile and hugs the curvature of the roof, so that I can still fit everywhere I can with my stock rails and cross bars (most importantly my garage!!) This is something I've been looking into, as well. I can only have another 4 inches above my stock rails at most and still fit in my garage, and I don't think any roof rack mounted on the aftermarket crossbars would fit under that limitation. I've been looking into somehow mounting a roof rack in between the stock bars.

Author:	0311_DoC [ Wed May 17, 2006 2:11 am ]
Post subject:
So whos gonna make it ??? Any welders out there interested in helping out ???

Author:	uvalax236 [ Wed May 17, 2006 9:37 am ]
Post subject:
0311_DoC wrote: So whos gonna make it ??? Any welders out there interested in helping out ??? When I get my welder this summer I could probably do something.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Putting a feeler out there...... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=8538	Page 1 of 1

Author:	Se7enLC [ Wed May 17, 2006 10:09 am ]
Post subject:
RespectMyLibertay wrote: I can only have another 4 inches above my stock rails at most and still fit in my garage, and I don't think any roof rack mounted on the aftermarket crossbars would fit under that limitation. I've been looking into somehow mounting a roof rack in between the stock bars. I did that, it works great. I have the Yakima basketcase mounted directly to the siderails using pipe clamps. Not only does it not extend above the thule rails, it doesn't even take up any space on the thule rails, so I can still put the normal thule racks on above it (bike rack, ski rack, etc), or throw boxes, furniture, plywood, etc on the roof without the basket being in the way.

Author:	0311_DoC [ Sat May 20, 2006 6:44 pm ]
Post subject:
pixeldzn wrote: This was my idea that kinda goes along with that: I want a rack that is very low profile and hugs the curvature of the roof, so that I can still fit everywhere I can with my stock rails and cross bars (most importantly my garage!!) So Pix have you pursued this idea at all yet? Curious what it would cost to get er done. I definately love the idea.

Author:	corwyyn [ Sun May 21, 2006 2:45 am ]
Post subject:
Hmm, don't know about the Xterra rack - I have a buddy with an '02 X and I've looked at it quite a bit to see if I could do something for mine. I think you'd wind up havning to drill into the roof to make it work. Pixeldzn, are you designing yours to fit in between the existing rails or replace them all togther?

Author:	pixeldzn [ Sun May 21, 2006 11:25 am ]
Post subject:
corwyyn wrote: Hmm, don't know about the Xterra rack - I have a buddy with an '02 X and I've looked at it quite a bit to see if I could do something for mine. I think you'd wind up havning to drill into the roof to make it work. Pixeldzn, are you designing yours to fit in between the existing rails or replace them all togther? Replacing the rails all together. This thing is gonna HUG the roof- say 1-2 inches above it max. Still looking for a fabricator without much success.

Author:	corwyyn [ Sun May 21, 2006 2:06 pm ]
Post subject:
pixeldzn wrote: corwyyn wrote: Hmm, don't know about the Xterra rack - I have a buddy with an '02 X and I've looked at it quite a bit to see if I could do something for mine. I think you'd wind up havning to drill into the roof to make it work. Pixeldzn, are you designing yours to fit in between the existing rails or replace them all togther? Replacing the rails all together. This thing is gonna HUG the roof- say 1-2 inches above it max. Still looking for a fabricator without much success. D'OH Guess if I had actually read all your notes in the drawing I would have seen that.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/