It is currently Thu Oct 16, 2025 4:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: cb radio and attena mounts
PostPosted: Sun Aug 26, 2012 2:34 pm 
Offline
LOST Newbie

Joined: Sun Apr 22, 2012 7:53 pm
Posts: 59
lets see em looking for ideas

_________________
06 CRD lmtd Blacked out
Renegade lightbar curt rack
moose tool boxes GDE
pinch welds ham SC t conv
3.7 fan egr del
steel glow plugs Frankenlifted
samco
gen. grab at2 30.5x10



mpg 24.6

This is my Jeep there are many like it but this one is mine!


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Tue Aug 28, 2012 8:30 am 
Offline
LOST Member
User avatar

Joined: Tue Aug 09, 2011 10:17 pm
Posts: 161
Location: Tamaqua, PA USA
Great thread that I myself was thinking of starting. I have/had my cb mounted on my center console storage compartment, secured with a bungee cord. The vinyl surface kind of locks it in with the bungee for extra hold. You will need an external speaker for this set-up as the one on the radio will be buried into the compartment cover. It's a bit difficult to change channels as you have to reach back a bit to do it, but it works for me, as I didn't have drill or modify anything inside the Jeep.

For an antenna, I've been using a simple magnet mount Wilson LiL Wil on the roof. The profile is way to high for any serious wheeling, and you better remove it prior to entering a parking garage (learned the hard way :oops: ). I'm looking for other antenna mounting ideas, without having to drill holes into the body in any conspicuous places.

One problem I've encountered in the past few weeks, and this may be because I'm using the 12v receptacle for power, is that I keep blowing the inline fuse when I try to use my higher powered radios (General Lee or Galaxy). The stock Cobra works fine...for what it is. I'm not sure if the 12v power source isn't enough for the 80w General Lee or 25w Galaxy, or if there is a short or other problem somewhere.

Can't wait to see some replies here.

_________________
2010 Liberty Sport, Command Trac 4x4
Rock Krawler 3.5 Inch X Factor Lift
Skyjacker H7071 rear shocks,
245/75R16 Firestone Destination A/T


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Thu Aug 30, 2012 6:44 pm 
Offline
LOST Newbie

Joined: Sun Apr 22, 2012 7:53 pm
Posts: 59
all these 4x4 guys and no show offs???? come on you have to have one for a most terrain parkes where do you put yours?

_________________
06 CRD lmtd Blacked out
Renegade lightbar curt rack
moose tool boxes GDE
pinch welds ham SC t conv
3.7 fan egr del
steel glow plugs Frankenlifted
samco
gen. grab at2 30.5x10



mpg 24.6

This is my Jeep there are many like it but this one is mine!


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Fri Aug 31, 2012 7:11 am 
Offline
LOST Member
User avatar

Joined: Tue Aug 09, 2011 10:17 pm
Posts: 161
Location: Tamaqua, PA USA
jaym540 wrote:
all these 4x4 guys and no show offs???? come on you have to have one for a most terrain parkes where do you put yours?


I suppose I could take a pic of my "set up" and post it here, but I did think this thread would be a bit more popular than it has been so far.

_________________
2010 Liberty Sport, Command Trac 4x4
Rock Krawler 3.5 Inch X Factor Lift
Skyjacker H7071 rear shocks,
245/75R16 Firestone Destination A/T


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Fri Aug 31, 2012 8:22 am 
Offline
LOST Addict

Joined: Mon Jun 14, 2010 8:49 am
Posts: 1336
Location: Greenwood SC
This was kinda posted in the wrong area. There is a whole area dedicated to CB etc. I would try reporting in there that is where I figured out my possible mounting setup.

_________________
My CRD Build Thread
Soon to Come:more lights


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Thu Nov 15, 2012 12:05 am 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
I mount my CB to my glove box, on the left hand side. High enough for it to open all the way and then pounded the mic mount in to the top right of the steering wheel area thinger.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: cb radio and attena mounts
PostPosted: Sun Nov 18, 2012 8:38 pm 
Offline
LOST Member

Joined: Wed Jul 18, 2012 9:33 am
Posts: 330
Location: Central NJ
I'm installing my CB unit in the center console (it comes in tomorrow :mrgreen: ). Antenna is a 2' Firestik that is mounted on a hinging mount on my RRO roof rack. Not optimal for going off road through trees, but it should be great on the highways. I'll post pics when I finally get it done :JEEPIN:

_________________
2012 Jeep Liberty Grey Jet Edition
OME 3" Lift (HD/MD), GY Silent Armor 245/70/16, RRO Adventure Rack, Steelcraft Grille Guard, WeatherTech Mats, Cobra CB w/ 3’ Whip, 12” LED bars, mud

Never Stop Exploring


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com