LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

OME lift is on
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=1801
Page 1 of 1

Author:  Fouros [ Sun Sep 11, 2005 5:28 pm ]
Post subject:  OME lift is on

put the lift on over the weekend i got 2 1/2 " on the front and 2 at the back

OME Medium duty at the front and light duty at the rear some b4 and after shots

Before

Image

after

Image

Author:  PitViper [ Sun Sep 11, 2005 6:15 pm ]
Post subject: 

Nice :)

How much did the kit cost if you don't mind me asking? And is the cost with shocks and struts?

Author:  Fouros [ Sun Sep 11, 2005 6:26 pm ]
Post subject: 

I retained the original front strut

front springs were 220 AUD

put a longer rear shock OME they are 139 AUD each

Rear springs were cheap as bought from a guy that put a Stiffer spring on the rear not long after he got the light duty ones

Author:  Eddo [ Sun Sep 11, 2005 6:51 pm ]
Post subject: 

Did you end up using any of those Daystar spacers you where talking about. Also, have you driven atleast a few miles before taking the post-measurments. All in all it looks great. Just some new meats and your ready to roll.

I have the same setup as you. Medium in the front and light duty in the back. I ended up with about 2.5" in the rear and about 1.5" in the front. Had to add some spacer to the font to level her out.

Author:  Guest [ Sun Sep 11, 2005 8:14 pm ]
Post subject: 

Lookin' good, mate!

Author:  Ed [ Sun Sep 11, 2005 8:41 pm ]
Post subject: 

Very nice mate!

That's a decent amount of lift you've gained. Let us know how much it settles, and how much the new rails (which I can't wait to see BTW!) weight it down. It'd be a shame not to get some chunkier tyres now you've got all that extra space under the arches.
;)

You might also want to take off the rear mud-flaps before (as happened to me) a friendly rock takes them off for you, along with half the wheel arch flare.

Author:  Fouros [ Sun Sep 11, 2005 9:50 pm ]
Post subject: 

Ajusting the Clevis

i am about 5mm Higher at the front to the back i was wondering if this could be the cause?

Image

Image

Author:  AusJeepa [ Thu Sep 15, 2005 9:49 pm ]
Post subject: 

Mate,

Just be careful and watch the CV's.

And shouldn't you be calling it a ODAYME lift

Author:  Guest [ Thu Sep 15, 2005 10:59 pm ]
Post subject: 

Looks Good :)

Author:  LibertyN8 [ Fri Sep 16, 2005 12:18 am ]
Post subject: 

Looking good! looking foward to seeing more pics from ya!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/