| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Got my Rubicons and MTR's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=1862 |
Page 1 of 2 |
| Author: | Tokyojoe [ Tue Sep 13, 2005 3:31 pm ] |
| Post subject: | Got my Rubicons and MTR's |
I just bought these off a guy that bought a new Rubicon and took it from the dealer to a 4x4 shop to super lift it and get big tires and wheels. So these have only a few test drive miles and the 5 mile drive to the shop on them. A great price for $800 for all five wheels and tires. 
|
|
| Author: | Guest [ Tue Sep 13, 2005 3:38 pm ] |
| Post subject: | |
|
|
| Author: | Guest [ Tue Sep 13, 2005 5:03 pm ] |
| Post subject: | |
Lookin' Good! Btw; are those running boards along the side? |
|
| Author: | Tokyojoe [ Tue Sep 13, 2005 5:30 pm ] |
| Post subject: | |
Stock Rails that come with the Renegade. Round tube. It looks big but it's not really sticking out. |
|
| Author: | CaKJFreedom [ Tue Sep 13, 2005 5:54 pm ] |
| Post subject: | |
Great improvement! |
|
| Author: | Burchie [ Tue Sep 13, 2005 7:38 pm ] |
| Post subject: | |
nice |
|
| Author: | dirtykj [ Tue Sep 13, 2005 7:57 pm ] |
| Post subject: | |
$800 is a steal! |
|
| Author: | PitViper [ Tue Sep 13, 2005 8:11 pm ] |
| Post subject: | |
Very nice BTW what size are the tires? |
|
| Author: | BlueFreedom [ Tue Sep 13, 2005 8:54 pm ] |
| Post subject: | Sweet!!! |
What kind of lift do you have on it? |
|
| Author: | AdamIsAdam [ Tue Sep 13, 2005 10:07 pm ] |
| Post subject: | |
Great price. Great look. Great color. Great model choice (Renegade). Great CB antenna mod. Too bad it's not a 2003, then it would be perfect 
|
|
| Author: | LibertyN8 [ Tue Sep 13, 2005 10:50 pm ] |
| Post subject: | |
MOAB BOUND!! looking good, Tokyojoe |
|
| Author: | Tokyojoe [ Wed Sep 14, 2005 12:47 am ] |
| Post subject: | |
Adam....hahahaha!!! If I had done the Reny basket mod, our KJ's would be near exact....just the rails would be different, I think. I have the Rusty 2 1/2" Coil Lift Tires are 245/75/16 and I am getting the rub 1. By the fog light door and on the pinch weld plastic cover. I will work on that this week. Will follow Adam's mod but I remember someone saying they didn't cut off the pinch weld plastic cover. They used the heat gun to melt it to stay there. Anyone know where I can find that mod version for the pinch weld (Pics)? |
|
| Author: | Neatus [ Wed Sep 14, 2005 9:17 am ] |
| Post subject: | |
Ahhh yeah, that is looking like one sweet KJ. Great job..... |
|
| Author: | nails023 [ Thu Sep 15, 2005 11:14 am ] |
| Post subject: | |
Looking Good TokyoJoe! I love that tire and wheel combo. I have a set waiting for my Frakenlift to be installed. Should be here next week. By the way I am sending you a PM about Buckley. |
|
| Author: | WV(0)IIIIIII(0) [ Thu Sep 15, 2005 11:50 am ] |
| Post subject: | |
I like the second pic where you are parked in a no parking zone 
|
|
| Author: | auggy [ Thu Sep 15, 2005 6:03 pm ] |
| Post subject: | |
Oh wow that looks amazing. I'm going to see if I can find some of those around here =].. Oh and do they rub at all? |
|
| Author: | auggy [ Thu Sep 15, 2005 6:35 pm ] |
| Post subject: | |
Oh and what were the details on the lift that you did? |
|
| Author: | Tokyojoe [ Thu Sep 15, 2005 8:26 pm ] |
| Post subject: | |
RUSTY's 2 1/2" Coil Lift |
|
| Author: | bighause [ Thu Sep 15, 2005 8:44 pm ] |
| Post subject: | |
Maybe one day Jeep figure out they need to make a model with this setup. Looks great! $800 for those wheels/tires is almost a crime. |
|
| Author: | Skyjump136 [ Thu Sep 15, 2005 9:09 pm ] |
| Post subject: | |
David, If you want to drive over here sometime we can knock out those pinch welds in about 20 minutes. I just did mine a couple months ago and it was relatively easy. I was going to do the thing with the heat gun, but I just used some black spray paint instead and you'd never notice. If you want to do the heat gun thing you still cut the plastic away. Then you flatten it with the gun, slide it back in the wheel well and either glue it in place or use the heat to melt it in place. Once I got in there I just decided that a rattle can of black paint would be easier. Honestly, I've seen the mod above and it doesn't end up looking much better to me (if at all). Just my .02 cents. The KJ looks great, btw. I'm glad you finally ditched the stockers! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|