Had some wheels painted and threw on these 265 75 16 ProComp MTs. Rock rails will go on this weekend when the weather warms up.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New shoes and XLRG rubbers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=19774 |
Page 1 of 1 |
| Author: | Neatus [ Tue Apr 17, 2007 5:51 pm ] |
| Post subject: | New shoes and XLRG rubbers |
Had some wheels painted and threw on these 265 75 16 ProComp MTs. Rock rails will go on this weekend when the weather warms up.
|
|
| Author: | RkyMtnKJ [ Tue Apr 17, 2007 6:23 pm ] |
| Post subject: | |
oo nice, really beefy lookin too, i like how you kept the lip on the rims as they are really makes it *pop* |
|
| Author: | 2006 KJ [ Tue Apr 17, 2007 6:25 pm ] |
| Post subject: | |
welcome to the world of rubbing  it's ok.. i couldnt resist the 265/75's either.. they look so good!.. great looking jeep..
|
|
| Author: | Skipperb [ Tue Apr 17, 2007 7:12 pm ] |
| Post subject: | |
Thase are the best painted wheels I have seen so far. nice detail on them. |
|
| Author: | tommudd [ Tue Apr 17, 2007 8:21 pm ] |
| Post subject: | |
Yes looking good, Ok may have to copy your style of painting on mine |
|
| Author: | 1300ZUK [ Tue Apr 17, 2007 11:48 pm ] |
| Post subject: | |
sweet, but why not de-badge the rest of the way or at least make it symmetrical? |
|
| Author: | Jeep_R_Roo14 [ Wed Apr 18, 2007 6:52 am ] |
| Post subject: | |
Very nice looking KJ!! Good job!! 
|
|
| Author: | Neatus [ Wed Apr 18, 2007 9:45 am ] |
| Post subject: | |
1300ZUK wrote: sweet, but why not de-badge the rest of the way or at least make it symmetrical?
I was just bored one day at my daughters cheer leading practice and took them off but never did the Renny badges. I am just waiting until my rockrails are on then I will put them on the rails. Figure I wouldn't lose them if they were still on the Jeep. Thanks for the comments guys. |
|
| Author: | Video Guy [ Wed Apr 18, 2007 10:22 am ] |
| Post subject: | |
I like the painted alloys. What kind of paint did you use? Can you summarize the process? |
|
| Author: | Neatus [ Wed Apr 18, 2007 1:49 pm ] |
| Post subject: | |
Video Guy wrote: I like the paited alloys. What kind of paint did you use? Can you summarize the process?
I have a buddy who works in a body shop. He used some straight black paint on the whole wheel then sanded the lip with a die grinder then clear coated and buffed them. He never had done any wheels like that. He said if he ever does it again he will polish the lip first then mask it off then paint the wheel unmask and then clear coat the whole wheel. He used my other set of cactus green Renegade wheels as inspiration. here is one wheel up close 
|
|
| Author: | Maximum Carnage [ Wed Apr 18, 2007 2:00 pm ] |
| Post subject: | |
I was thinking of doing the same thing if not similar. But no one could actually help me out or show me what they might look like after words. This clears thing up. Below is the post when I was looking for info. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=18758&highlight= |
|
| Author: | RAYMAN975 [ Thu Apr 19, 2007 12:12 am ] |
| Post subject: | |
darn thats nice!!!!!!!!!!!!! |
|
| Author: | Video Guy [ Thu Apr 19, 2007 4:40 pm ] |
| Post subject: | |
Neatus wrote: Video Guy wrote: I like the paited alloys. What kind of paint did you use? Can you summarize the process? I have a buddy who works in a body shop. He used some straight black paint on the whole wheel then sanded the lip with a die grinder then clear coated and buffed them. He never had done any wheels like that. He said if he ever does it again he will polish the lip first then mask it off then paint the wheel unmask and then clear coat the whole wheel. He used my other set of cactus green Renegade wheels as inspiration. Thanks for sharing. I'm thinking my factory steels would look pretty cool in gloss black, but I don't know if it would be worth the trouble and expense to properly prep and repaint. I got my eye on some 16x8 Procomp 7023's in matt finish to complement the fender flares and bumpers. 
|
|
| Author: | Neatus [ Thu Apr 19, 2007 5:07 pm ] |
| Post subject: | |
Yeah, ProComp actually has a few nice wheels for reasonable prices. I almost bought some but then ran across these wheels for 150 bucks and couldn't pass em up. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|