So finally got a chance to tackle this project after looking at the lift kit and tires sitting in my living room for three months! Check it out....
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ***Lift Finally Installed PICS*** http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=20486 |
Page 1 of 1 |
| Author: | jdumont [ Mon May 07, 2007 12:25 pm ] |
| Post subject: | ***Lift Finally Installed PICS*** |
So finally got a chance to tackle this project after looking at the lift kit and tires sitting in my living room for three months! Check it out....
|
|
| Author: | Freshmud [ Mon May 07, 2007 3:01 pm ] |
| Post subject: | looks |
looks really good, how is the kj black fenders and side skirts and white bumpers |
|
| Author: | jdumont [ Mon May 07, 2007 5:19 pm ] |
| Post subject: | |
I Herculined the lower doors and fender flares and left the bumpers for now. Im considering doing the rest.... Thanks for the compliment! Much appreciated. |
|
| Author: | raceinfan [ Mon May 07, 2007 5:38 pm ] |
| Post subject: | |
dumont I sent you a PM 
|
|
| Author: | Rush345 [ Tue Jul 24, 2007 1:10 am ] |
| Post subject: | |
How much product did it take and how easy was it to apply?? Brush or Roller what type of masking did you use ?? It really looks great can wait to try it myself. It also looks like it adds some integrity to the Sports plastic fender flares am I right or just whishfull thinking 
|
|
| Author: | jdumont [ Tue Jul 24, 2007 5:43 am ] |
| Post subject: | |
I used two of the $30 smaller cans. I didnt want to buy the gallon in case it wasnt stored right in between coats and got ruined. Its not that cheap afterall.... I have the Limited so im not sure what it does to the sport flares. Either way it looks good and gets lots of attention from guys in parking lots. They all try to secretly run their fingers across it when they walk by. I used a brush for the whole thing. I think the roller is the way to go however. Just used regular blue painters masking tape which worked fine. I plan on buying one more can and doing some touch up after I install my ARB this weekend. That should be fun! Good luck! |
|
| Author: | jerbacher [ Tue Jul 24, 2007 11:53 am ] |
| Post subject: | |
could you show some close up pics of the fender flares? i'm looking at different options to get this look and id like to see how even it is using a brush or roller, as opposed to spray cans, or pro line-x. thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|