LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

SILVERLIB WITH MOABS AND MTRS
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=22399		 Page 1 of 1
Author:  silverlib31 [ Tue Jul 10, 2007 3:02 pm ]
Post subject:  SILVERLIB WITH MOABS AND MTRS
I just got my wheels on and adjusted my rear link bars on my lift. I did a little flexing just to check things, I was able to stuff the rear wheel all the way into the fender well. I also removed the running boards man this thing looks tall. Gotta love the liberty.
[img][img]http://img354.imageshack.us/img354/5793/flexed002ey0.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
[img][img]http://img508.imageshack.us/img508/8378/flexed003wr7.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
[img][img]http://img79.imageshack.us/img79/9623/flexed004vk3.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
Author:  raceinfan [ Tue Jul 10, 2007 3:45 pm ]
Post subject: 
NICE 8) now go get it dirty & test that lift & report back :wink:
Author:  Saf's 06KJSport [ Tue Jul 10, 2007 3:50 pm ]
Post subject: 
what do you have covering the holes on your back tailgate where the spare connects???
Author:  pokefan [ Tue Jul 10, 2007 4:06 pm ]
Post subject: 
Saf's 06KJSport wrote:
what do you have covering the holes on your back tailgate where the spare connects???


I think it's just the stock brackets left in place.

I have to say that looks so much better then before! :D
Author:  tjkj2002 [ Tue Jul 10, 2007 4:53 pm ]
Post subject:  Re: SILVERLIB WITH MOABS AND MTRS
silverlib31 wrote:
I just got my wheels on and adjusted my rear link bars on my lift. I did a little flexing just to check things, I was able to stuff the rear wheel all the way into the fender well. I also removed the running boards man this thing looks tall. Gotta love the liberty.
[img][img]http://img354.imageshack.us/img354/5793/flexed002ey0.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
[img][img]http://img508.imageshack.us/img508/8378/flexed003wr7.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
[img][img]http://img79.imageshack.us/img79/9623/flexed004vk3.jpg[/img]
Shot with KODAK DX6490 ZOOM DIGITAL CAMERA at 2007-07-10[/img]
Lookin much better!!!!!!!!!!!!!!!!!!
Author:  silverlib31 [ Tue Jul 10, 2007 5:36 pm ]
Post subject: 
tjkj what kind of bump stops are you running now because i am going to install a set and i was wondering what you were running? Thanks
Author:  SoDakJeep [ Tue Jul 10, 2007 7:38 pm ]
Post subject: 
do you have any pics of it setting level????
Author:  tjkj2002 [ Tue Jul 10, 2007 8:00 pm ]
Post subject: 
silverlib31 wrote:
tjkj what kind of bump stops are you running now because i am going to install a set and i was wondering what you were running? Thanks
My rear bumbstops are the one's that came with my SkyJacker lift,they look to be about 3" high,perfect for my setup.The fronts are also longer and came with my lift.
Here is a pic.
    Image
Author:  Sport [ Tue Jul 10, 2007 9:50 pm ]
Post subject: 
Good Job, much better.

Do you have any poser pics of the liberty with out any flexing? The new setup, not the old. 8)
Author:  csukoh78 [ Tue Jul 10, 2007 10:21 pm ]
Post subject: 
wow that looks MUCH better than it did..... :lol:
Author:  renegadekj [ Tue Jul 10, 2007 10:29 pm ]
Post subject: 
Now that's more like it! Good job. Have you had a chance to try out that lift offroad yet?Keep us updated
Author:  silverlib31 [ Tue Jul 10, 2007 11:57 pm ]
Post subject: 
I wil take a pic sittin level and post it tommoroww also thanks for the pic of the bump stop tjkj. Does taht set up limit your articulation alot or just help from over stuffing those 265's. If i recall you just got nuw tyres too.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/