LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

TJM Bumper installed!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=23783		 Page 1 of 2
Author:  Endurance [ Sun Aug 26, 2007 5:47 pm ]
Post subject:  TJM Bumper installed!
Finally got my TJM bumper......

Image

Image

Image
Author:  desertkj [ Sun Aug 26, 2007 5:49 pm ]
Post subject: 
Very nice. What's with the Euro license plate? You're in Alabama, right?
Author:  Endurance [ Sun Aug 26, 2007 5:58 pm ]
Post subject: 
desertkj wrote:
Very nice. What's with the Euro license plate? You're in Alabama, right?


Thanks! Well yes I do live in Alabama but Im german. I moved here 4.5 years ago. This is what the plate reads:

GM stands for the County I used to live in over there, called Gummersbach
DH stands for my name, Daniel H.
86 is my birthday
Author:  RkyMtnKJ [ Sun Aug 26, 2007 6:15 pm ]
Post subject: 
nice family of jeeps ya got there....can we trade bumpers? :wink:
Author:  mapco [ Sun Aug 26, 2007 6:36 pm ]
Post subject: 
Where are the TÜV and state stickers? :o
Author:  tommudd [ Sun Aug 26, 2007 6:51 pm ]
Post subject: 
Looking good for sure! :wink:
Author:  tjfisher*CRD [ Mon Aug 27, 2007 7:48 pm ]
Post subject: 
Looking good so how much and who did you order it threw ? tjm doesnt have it listed for the liberty ?
Author:  Endurance [ Mon Aug 27, 2007 11:09 pm ]
Post subject: 
Thanks guys. I bought it at Performance Off Road in Bogart, GA Tel: 706-548-9393 for $820 shipped to the door.
Author:  Saf's 06KJSport [ Mon Aug 27, 2007 11:15 pm ]
Post subject: 
thats one of the nicer bumpers that ive seen for our KJs. definetly a future mod for me!! :D
Author:  callaway [ Tue Aug 28, 2007 10:12 am ]
Post subject: 
looks great 8)

how was the install?
Author:  Endurance [ Tue Aug 28, 2007 12:02 pm ]
Post subject: 
callaway wrote:
looks great 8)

how was the install?


Not too bad. The holes on the sub assembly didnt line up with the frame so I had to improvise. Other than that pretty smooth install. Took about 6 hours.
Author:  hallb4 [ Tue Aug 28, 2007 12:06 pm ]
Post subject: 
Another sharp looking black KJ. I need to get around to post pictures of my lift and tires....
Author:  TDI4BY [ Tue Aug 28, 2007 2:38 pm ]
Post subject: 
Are all the Euro plates that way or is it a personalized one or something.
LN JD 75 :D I am from Lynden,WA.
Author:  hallb4 [ Tue Aug 28, 2007 5:37 pm ]
Post subject: 
Ha! Lynden is just down the road. Do you make it back up here very much?
Author:  Endurance [ Tue Aug 28, 2007 10:51 pm ]
Post subject: 
TDI4BY wrote:
Are all the Euro plates that way or is it a personalized one or something.
LN JD 75 :D I am from Lynden,WA.


No thats not personalized, except for the DH 86 part. If I would have a car in germany then thats how it would look like.
Author:  mapco [ Wed Aug 29, 2007 8:13 am ]
Post subject: 
Endurance wrote:
TDI4BY wrote:
Are all the Euro plates that way or is it a personalized one or something.
LN JD 75 :D I am from Lynden,WA.


No thats not personalized, except for the DH 86 part. If I would have a car in germany then thats how it would look like.
Except the TÜV and Nordrhein-Westfalen stickers are mysteriously missing. :?
Author:  Endurance [ Thu Aug 30, 2007 12:26 am ]
Post subject: 
emsox wrote:
Endurance wrote:
TDI4BY wrote:
Are all the Euro plates that way or is it a personalized one or something.
LN JD 75 :D I am from Lynden,WA.


No thats not personalized, except for the DH 86 part. If I would have a car in germany then thats how it would look like.
Except the TÜV and Nordrhein-Westfalen stickers are mysteriously missing. :?


Yeah I know, but we're in Alabama so woobdeedoo :lol: Good enough though, as a german you will recognize a german plate right away.
Author:  foosed [ Thu Aug 30, 2007 2:45 pm ]
Post subject: 
I love the look of that bumper. Is it any lighter than the ARB?

I am also looking at the same wheel and tire setup and wondered if you get any rubbing with them. Thanks.
Author:  Endurance [ Sun Sep 02, 2007 11:19 am ]
Post subject: 
foosed wrote:
I love the look of that bumper. Is it any lighter than the ARB?

I am also looking at the same wheel and tire setup and wondered if you get any rubbing with them. Thanks.


I dont know how it compares to the ARB regarding weight, but its pretty heavy. The shipping ticket said 150 pounds.
And yes I did have rubbing at full lock. I hammered down the pinchweld and Dremeled some of the plastic. Now I dont have any rubbing at all.

If you plan on getting the same setup though make sure you get the OME HD coils and struts. Thats probably the best investment I ever made.
Author:  foosed [ Tue Sep 04, 2007 4:26 pm ]
Post subject: 
I have OME HD coils, shocks, struts, and bumpstops on the way as we speak. Thanks Endurance for your help.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/