LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

UDATED; NEW STUFF: KKKustom's 05 Lifted 31" muders on 1
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=2739		 Page 1 of 1
Author:  kkkustom [ Fri Oct 14, 2005 9:13 pm ]
Post subject:  UDATED; NEW STUFF: KKKustom's 05 Lifted 31" muders on 1
NEW:
KKKinc. KJ light Bar. with stainless hardware, 4 HELLA 500's.

DrawTite front reciever.

Almost complete sub/amp set up. So far just 2 Alpine 605 mono amps running the two Alpine SWR 12". The amp rack is built out of steel tubeing and shaped like a roll cage. The wires hanging down in the center will soon go to an Alpine 4ch amp (not mounted yet) to power the Alpine Type X components front and rear. The amp rack uses all stainless allen head bolts to hold the amps and the cage to the boxes/jeep.

Also pictured is my 04 Yamaha YFZ450, with way too much to list here.

Image
Image
Image
Image
Image
Image
Author:  kkkustom [ Fri Oct 14, 2005 9:18 pm ]
Post subject: 
I will fix the link if they dont work, webshots sucks..
Author:  Eddo [ Fri Oct 14, 2005 9:23 pm ]
Post subject: 
Forbiden access
Author:  ShadE [ Fri Oct 14, 2005 9:37 pm ]
Post subject: 
right click on the x and click "view image"


very nice rig. looks rugged :)
Author:  Gringo Loco [ Fri Oct 14, 2005 9:44 pm ]
Post subject: 
Here you go guys, looks good.

Chris


Image
Author:  kkkustom [ Fri Oct 14, 2005 9:46 pm ]
Post subject: 
Image
Author:  Steakgoddess [ Fri Oct 14, 2005 10:35 pm ]
Post subject: 
Looks nice!
Author:  Edwin [ Fri Oct 14, 2005 11:10 pm ]
Post subject: 
Looks dern good.
Author:  MikeD0106 [ Sat Oct 15, 2005 1:17 am ]
Post subject: 
Very nice...
Author:  mason6602 [ Sat Oct 15, 2005 6:48 am ]
Post subject: 
any rubbin going down to a 15 inch rim?
Author:  kkkustom [ Sat Oct 15, 2005 8:31 am ]
Post subject: 
mason6602 wrote:
any rubbin going down to a 15 inch rim?


Rubbing as in wheel on the caliper/tie rod end link? Nope, has the same space as the stock 16"! It is all in the say they buld the wheel!

Rubbing on the fender with the tire... of course. the normal issues, front inner fender/bumper cover and the pinch weld in the back. but that is dependant on the tire size not the wheel.
Author:  04kjsport [ Mon Oct 17, 2005 3:04 pm ]
Post subject: 
what backspacing are u running
Author:  kkkustom [ Tue Oct 18, 2005 12:41 pm ]
Post subject: 
15X8 4.5" BS
Author:  fiend [ Tue Oct 18, 2005 12:48 pm ]
Post subject: 
did you do something to your corner lenses, or is that just the lighting?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/