here is a pic of the light bar on. sitting next to a YJ on NAS Pensacola, FL. all i need to do is wire it and it is done.

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap

looks great!!! those will def. be my next set of tires. My renny didnt come with a lightbar so i put mine on when i got it. nothing like drilling all those holes in your roof the wiring isnt bad at all.. i just used a piggyback fuse and the stock wiring it came with.

_________________
2006 Renegade. Completely stock.

I really like the light bar. How bad was it to drill in the roof? I've got a Renegade light bar coming. I'm very good with electrical, but I'm not feeling very comfortable with drilling a bunch of holes in the roof. I don't know if I want to attemp it myself, or just pay someone to do it.

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...

do it yourself it's not bad at all! i taped everything off good so i didnt put a ton of metal shavings in all the cracks to rust.. then just lay down a bunch of 2inch masking tape. put the bottom of the light bar up there and mark your holes! the nutzerts are the only tricky part.. but i have a nutzert tool so i didnt have to cross that bridge. that's really all there is to it besides the electrical. oh yeah and make sure you use some type of sealant around the nutzerts and bolts!

_________________
2006 Renegade. Completely stock.

loooks really nice! btw. i miss NAS pensacola.

NAS Pensacola is nice. I am only staying in the barracks there while i am in school at Corry Station.

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap

I have a light bar and the one wire that comes from the bar in to the pillar as well as the switch. what else do I need to install it.

_________________
Benny Migs
03 Black Sport
Front OME HD Coils Struts 1/2inch clevis lift, Rear OME 132L OME HD Coils 2 ISO upper pads
30x9.5x15 General Grabbers AT2 on Craiger Soft 8's 15x7 4" BS
safari rack, super nerfs, Rear Hitch, Front ARB Bumper , JBA A-Arms




http://www.BennyMigsPhoto.com

how long was installation...wheres the best place to buy from (cheapest)

_________________
First Car 03' Sport 4x4; air deflector; debadged; Frankenlifted; Gen 4.5 UCA's; Custom Mesh Grille Inserts; Flowmaster Super 44; 265/70/16 General Grabber AT2's; Unique Series 42 "D" Wheels; Sony T330 CD Receiver Head Unit;Kicker 12" sub;Kicker 400.1 Amp

http://www.cardomain.com/ride/3158614

one for the renegade light bar club. hahah you park next to SEXY JAN.....so is she sexy ?

Where is the best place to get the renagade light bar?

_________________
One Life - Live It

if not from someone on here then you'll be able to gt one from EBAY.