LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

I Installed somthing!!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=38712
Page 1 of 1

Author:  ramlebliberty [ Mon Dec 29, 2008 11:04 pm ]
Post subject:  I Installed somthing!!!

New lights baby! Hella 500ff, spent a few hours wiring it up nice and neat and clean, then had to wrestle with the bolts on the bottom. Still have some work to do getting the bolts on the bottom tighter and have to solder some connections i re-did with quick clips but, other than that i got my dose of self achievement today. Should have seen my wife shaking her head while I was running around like a 10 year old after I finished Installing them!

Image

Image

Image

Author:  loganbrumm [ Mon Dec 29, 2008 11:16 pm ]
Post subject: 

Very nice! I put mine on wednesday! Did you take off the bumper cover or just fight thru the plastic?

Author:  ramlebliberty [ Mon Dec 29, 2008 11:21 pm ]
Post subject: 

no fighting, just drilling :twisted: if you have a 3" extension for you socket you can fit it up there just right. My socket wasn't deep enough to get great tourqe on it, so I have to re-mount them and put a bolt on top to get it nice and snug

Author:  Sean150 [ Tue Dec 30, 2008 12:32 am ]
Post subject: 

Very nice, You'll have to go find a remote road one night and try them out and report back on how well they work.

Author:  ohv_kj [ Tue Dec 30, 2008 2:45 am ]
Post subject: 

oh...i can help him w/ that...lol...looking good buddy...tell wifey merry x-mas and i'll be back sunday... :D 8) 8)

Author:  ramlebliberty [ Tue Dec 30, 2008 8:34 am ]
Post subject: 

GOOD NEWS! ha, i thought you were going to stay in w.virginia its been so long. Are you having Jeep withdrawl!?! I can just imagine what kind of abuse your putting that trailblaizer through lol

Author:  04jeepkj [ Tue Dec 30, 2008 10:38 am ]
Post subject: 

Great addition to your KJ!! Where did you mount the switch at? Before my ARB i did the same and i used the cut outs for the tow hooks to get ahold of the nut and bolt to tighten the lights down. My switches i put on a piece of plastic that pops out, drill and tighten down. I just made the mistake of letting a buddy of mine try and drill the holes and well its no where near straight but it works.

Image
Image

Author:  beep jeep mn [ Tue Dec 30, 2008 12:13 pm ]
Post subject: 

looks really nice.

gotta love that Color. :)

Author:  ramlebliberty [ Tue Dec 30, 2008 3:44 pm ]
Post subject: 

04jeepkj wrote:
Great addition to your KJ!! Where did you mount the switch at? Before my ARB i did the same and i used the cut outs for the tow hooks to get ahold of the nut and bolt to tighten the lights down. My switches i put on a piece of plastic that pops out, drill and tighten down. I just made the mistake of letting a buddy of mine try and drill the holes and well its no where near straight but it works.

Image
Image


my switch is mounted in the same spot. hopefully i can add more in the future

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/