Clipped a bambi on my way down to ouray for the 4th of July. Made out alright on the damage, got a $2200 check from insurance.
So I've been running around taking care of other things, and even though I've had my parts for a month now I finally got around to painting them.
I used some low VOC paint I got in california(which is where I painted the fender the first time), this is weird stuff, has a odd smell, but not much of a smell compared to a urethane or acrylic. What I like about this paint(and also what I don't like) is that it doesn't set up very quickly. Which makes it a little longer to spray something, but when you do finish your final coverage coat and have good color on everything, you let it sit, and 20 mins later it glosses over nicely.
Then an hour later its still too tacky to handle. After about 1.5 hours I moved the parts out into the sun to let them cure. I will let the parts cure overnight and then again in the sun tomorrow before installing them thursday morning. With fresh paint when you apply pressure(like when trying to get a fender to go into place) you can leave imprints if it hasn't cured 100%.
