These are some pics of my new KC Off-road driving lights that I installed today with the help of some of my friends. It took way longer than it should have but we got them installed.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New KC Off-road lights installed today! w/ pics http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=4943 |
Page 1 of 1 |
| Author: | kjmurphy [ Sat Jan 14, 2006 10:37 pm ] |
| Post subject: | New KC Off-road lights installed today! w/ pics |
These are some pics of my new KC Off-road driving lights that I installed today with the help of some of my friends. It took way longer than it should have but we got them installed.
|
|
| Author: | Eddo [ Sun Jan 15, 2006 10:19 am ] |
| Post subject: | |
Cool lights, I got a set of the KC slimlite 100w driving lights also. My do they really light up the road at night. You can't even tell if your head lights are on or not. |
|
| Author: | zeero [ Sun Jan 15, 2006 2:01 pm ] |
| Post subject: | |
Looks good bro! 
|
|
| Author: | BLANCK88 [ Mon Jan 16, 2006 12:49 pm ] |
| Post subject: | |
very nice. i am looking for the same kind of look. how did yoy mount them? Can you show a pic of where you mountd the on/off switch? |
|
| Author: | kjmurphy [ Tue Jan 17, 2006 7:28 pm ] |
| Post subject: | |
If you look under the bumper (mines an 05', the bumpers of the 04 and down are different but may have the same design) there are two square shaped openings just to the inside of the stock fogs lights. I used those two holes and drilled through the bumper (make sure you drill far enough back to hit the metal opening) then I had to buy longer bolts because the ones that come with the KC fog lights are too short. Next I put the bolt up through the bumper instead of down because I didn't have the right tools. The wiring is easy just follow the instructions and there is a hole in the fire wall to the left of the brake pedal to put the wire through. I haven't mounted the switch yet because my friend has a Subaru WRX and said there may be a stock switch plate you can buy to put in the dash. (I haven't called jeep about it yet though) If there is no stock switch plate I'll take a piece of the dash out drill some holes to mount it. PS. My friend who is really good with computers posted my pics so next time he's over I'll post the some more pics. hope this helps |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|