The bezel is made by my company, Double Diamond Jeeps. All LOST members will recieve a $5 discount. Please e-mail me at doublediamondjeeps@msn.com if you are interested!
Also, please view my website:
http://www.doublediamondjeeps.com
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Double Diamond Jeeps Switch Bezel http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=5107 |
Page 1 of 1 |
| Author: | kicks6000 [ Sat Jan 21, 2006 10:13 pm ] |
| Post subject: | Double Diamond Jeeps Switch Bezel |
|
The bezel is made by my company, Double Diamond Jeeps. All LOST members will recieve a $5 discount. Please e-mail me at doublediamondjeeps@msn.com if you are interested! Also, please view my website: http://www.doublediamondjeeps.com |
|
| Author: | auggy [ Sun Jan 22, 2006 2:03 am ] |
| Post subject: | |
What is that switch for? |
|
| Author: | brpn#1 [ Sun Jan 22, 2006 10:02 am ] |
| Post subject: | |
$15 for that? there is room for switches on both sides of the steering column.. if you have light bar the switch is on the left.. |
|
| Author: | kicks6000 [ Sun Jan 22, 2006 10:50 am ] |
| Post subject: | |
One, it is made out of sheet metal. Two, this is for people who do not want to cut giant holes out of their dash. Cherokees and Wranglers have a bezel in the same location for a reason. Wiring to the cubby hole is also easier than reaching the location next to the steering column. Trust me, I tried. Three, LOST members get the bezel for $10. |
|
| Author: | Taz [ Sun Jan 22, 2006 12:43 pm ] |
| Post subject: | |
What you guys need to come up with is a bezel that has 2 more power outlets in it and an easy way to wire it into the Liberty, switched outlets would be nice. |
|
| Author: | kicks6000 [ Sun Jan 22, 2006 3:35 pm ] |
| Post subject: | |
Taz wrote: What you guys need to come up with is a bezel that has 2 more power outlets in it and an easy way to wire it into the Liberty, switched outlets would be nice.
Sounds like a good idea. I will look into it. |
|
| Author: | Se7enLC [ Mon Jan 23, 2006 6:03 pm ] |
| Post subject: | |
I see your site says that a bumper-mount lightbar for the 02-04 liberties is coming soon. ANy plans for an 05 model? |
|
| Author: | dirtykj [ Mon Jan 23, 2006 6:57 pm ] |
| Post subject: | |
Doesn't seem to fit very well. The top left corner has a straight cut instead of following the curvature of the cubby hole. Is the bezel wide enough to fit a typical 3.5" card reader faceplate? |
|
| Author: | kicks6000 [ Mon Jan 23, 2006 9:22 pm ] |
| Post subject: | |
Se7enLC wrote: I see your site says that a bumper-mount lightbar for the 02-04 liberties is coming soon. ANy plans for an 05 model?
That is definately on me list. I just need to get some measurements from an 05. |
|
| Author: | kicks6000 [ Mon Jan 23, 2006 9:28 pm ] |
| Post subject: | |
dirtykj wrote: Doesn't seem to fit very well. The top left corner has a straight cut instead of following the curvature of the cubby hole. Is the bezel wide enough to fit a typical 3.5" card reader faceplate?
Well, it fits tight. It is made of sheet metal and I wasn't sure how far the bezel would go back to fit in perfectly. I also didn't want that corner to scrap the plastic on that curve. That's why I cut it like I did. As for the card reader, it will fit horizontally. |
|
| Author: | ManicMechanicJoe [ Thu Jan 26, 2006 1:23 am ] |
| Post subject: | |
how about us with the '02's? no switch bezels for us? |
|
| Author: | kickit_in4wheel [ Thu Jan 26, 2006 1:42 am ] |
| Post subject: | |
don't complain guys, a discount is a discount. Just don't buy one if you don't like it. Rick |
|
| Author: | kicks6000 [ Thu Jan 26, 2006 2:35 pm ] |
| Post subject: | |
ManicMechanicJoe wrote: how about us with the '02's? no switch bezels for us?
I know...but there is no room for it. You have that ash tray, cigarette lighter, and power outlet. |
|
| Author: | ManicMechanicJoe [ Thu Jan 26, 2006 10:53 pm ] |
| Post subject: | |
oh well i geuss i will have to be happy with more ground clearance, a tougher tranny, and a sweet/rare color...i geuss no bezel for me 
|
|
| Author: | MattyMac1 [ Sun Jan 29, 2006 11:37 pm ] |
| Post subject: | |
I don't like it. IMHO it looks like a hack job and the liberty has poor storage space to begin with as far as the glove box and side pockets are concerned.I wouldn't want to give up my little cubby hole down there.. No offense,I just don't like.. |
|
| Author: | kicks6000 [ Sun Jan 29, 2006 11:54 pm ] |
| Post subject: | |
I sure don't think it looks like a hack-job. Believe me, I wouldn't hack my $20,000 Jeep. I love how it fits in my Liberty, and it truly does look great. What are you going to put in that cubby hole anyways? An owner's manual? Maps? Pop can? CDs? I put an iPod and a cellphone in there once. I also place those in my cupholders. Maybe you can put a screwdriver in there for the trail. Don't get me wrong-I am being sarcastic. I just thought people would like to put some actual use into their cubby holes. If you like it, and see the potential like I do, buy it. If you don't, leave it at that. But don't make false conclusions when you haven't even seen it. Oh, by the way, there is a slot for the owner's manual in the glove compartment under the "Oh Sh**" bar" or were it should go in the 02's and 03's. I just discovered this a few weeks ago. Sadly, I was very excited. Remember the good days: 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|