| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 6 inch lift installed http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=52424 |
Page 1 of 3 |
| Author: | extreme_kj [ Mon May 03, 2010 4:35 pm ] |
| Post subject: | 6 inch lift installed |
After one year of wanderings finally i 've come to this.. ![]() ![]() ![]() ![]() ![]() and some off roading.. ![]() ![]() ![]() ![]() ![]() ![]()
|
|
| Author: | Diggerfreek [ Mon May 03, 2010 4:44 pm ] |
| Post subject: | Re: 6 inch lift installed |
Thats really nice! |
|
| Author: | Quicksilversurf917 [ Mon May 03, 2010 4:52 pm ] |
| Post subject: | Re: 6 inch lift installed |
Wow that looks really good. Give us some info about the lift, tires, gears, etc. that is a beautiful rig!
|
|
| Author: | extreme_kj [ Mon May 03, 2010 4:58 pm ] |
| Post subject: | Re: 6 inch lift installed |
SUSPENSION - JBA 6” springs rear - BILSTEIN 6” springs front - TERAFLEX bump stops front/rear - BILSTEIN Adjust A-Strut racing coilovers - BILSTEIN remote reservoir front/rear - JBA front shock mounts WHEELS / TIRES - PROCOMP black steel 16x8 - COOPER Discoverer STT 285/75/16 FRONT DIFFERENTIAL - MOTIVE 4.10 gear ring and pinion - ARB air locker - JBA Upper A-Arms Gen.4 - J.E REAL Heavy Duty cv axles - JBA 2” Stearing knuckle extension - JBA 2” K frame blocks - JBA 2” trans cross member blocks REAR DIFFERENTIAL - MOTIVE 4.10 gear ring and pinion - ARB air locker - JBA 6” Y-link mount extension - JBA Y-Link Long Arms BODY - XMC front bumper with winch mount, pull bar and heavy duty tow receivers - T-MAX 9.500 lbs front winch with remote control - 2 PROCOMP front spot lights - XMC back bumper with winch mount and heavy duty tow receivers - T-MAX 9.500 lbs rear winch with remote control - XMC Rock Sliders - 2" wider custom made polyester flares front/back - AIRFLOW snorkel with pre-filter - XMC Roof Rack with windscreen - 4 PROCOMP roof spot lights - MIDLAND CB |
|
| Author: | CD [ Mon May 03, 2010 5:39 pm ] |
| Post subject: | Re: 6 inch lift installed |
That's great.. love it. |
|
| Author: | tommudd [ Mon May 03, 2010 5:44 pm ] |
| Post subject: | Re: 6 inch lift installed |
So the next question(s) Good and bad points? anything you would want to change to make it better? How much of a bumpstop do you have in the rear? Just wondering Looks good |
|
| Author: | KJ 119 [ Mon May 03, 2010 6:11 pm ] |
| Post subject: | Re: 6 inch lift installed |
Expedition ready. |
|
| Author: | JeepinJarhead03 [ Mon May 03, 2010 6:25 pm ] |
| Post subject: | Re: 6 inch lift installed |
as usual, Love your Rig! did you do a cradle drop as well or were the cut cv's enough? and how is the angle on the rear driveline with the adjustable rear arms? |
|
| Author: | Chino78 [ Mon May 03, 2010 6:52 pm ] |
| Post subject: | Re: 6 inch lift installed |
Did you take pictures of the craddle drop kit?? How many inches it drop? How your cv's angle?? |
|
| Author: | timmyb457 [ Mon May 03, 2010 7:28 pm ] |
| Post subject: | Re: 6 inch lift installed |
i like it. i'd love to see some pics of the front |
|
| Author: | extreme_kj [ Tue May 04, 2010 3:48 am ] |
| Post subject: | Re: 6 inch lift installed |
I think lifting a kj more than 3'' is a headache. At this point i see no bad points. Maybe a bad issue is the fuel consumption. I see 20lt per 100km on the highway. The frame has dropped about 2,5'' and the CV axles have been changed with heavyduty. The cv's angle is quite the same when i had my OME-Skyjackers. |
|
| Author: | extreme_kj [ Tue May 04, 2010 4:07 am ] |
| Post subject: | Re: 6 inch lift installed |
![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
|
| Author: | JeepinJarhead03 [ Tue May 04, 2010 4:22 am ] |
| Post subject: | Re: 6 inch lift installed |
14 MPG on the highway? youch, could be worse i guess |
|
| Author: | extreme_kj [ Tue May 04, 2010 4:29 am ] |
| Post subject: | Re: 6 inch lift installed |
No that's 11,8 MPG. What about others consumption ??? |
|
| Author: | JeepinJarhead03 [ Tue May 04, 2010 4:34 am ] |
| Post subject: | Re: 6 inch lift installed |
Ah, my math must be off I get about 17 average on the highway if i keep it between 55 and 65mph, with about 450lbs of bumpers and skids, and 100-150 lbs of cargo in the rear but i'm only about 21 inches overall from flare to center of the wheel |
|
| Author: | Diggerfreek [ Tue May 04, 2010 4:42 am ] |
| Post subject: | Re: 6 inch lift installed |
Depending on what tire I run, as low as 14 and as high as 20 on the highway.... |
|
| Author: | extreme_kj [ Tue May 04, 2010 4:49 am ] |
| Post subject: | Re: 6 inch lift installed |
I don't know.. could it be the tire on the roof? I've never try without it. |
|
| Author: | JeepinJarhead03 [ Tue May 04, 2010 5:45 am ] |
| Post subject: | Re: 6 inch lift installed |
I'm sure it does have some to do with it do you run 4.10 or 3.73 ? |
|
| Author: | extreme_kj [ Tue May 04, 2010 5:49 am ] |
| Post subject: | Re: 6 inch lift installed |
I run Motive 4.10 |
|
| Author: | JeepinJarhead03 [ Tue May 04, 2010 6:04 am ] |
| Post subject: | Re: 6 inch lift installed |
then it's probably just a combination of the height plus tire on the roof, plus weight, i can't imagine what else it could be, as nice as your rig is, i have to assume you keep it tuned up regularly I do have to ask, how you like the Cooper STT's? I really liked the other tires you had, even tried to import a set but couldn't |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|