| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| My KJ in progress http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=72870 |
Page 14 of 14 |
| Author: | TheBlueKJ [ Thu Apr 19, 2018 1:04 pm ] |
| Post subject: | Re: My KJ in progress |
Put the new starter in and drove it to work this morning. Everything is running a ok. Going to do the pitman shaft seal after work since thats leaking like a sieve Sent from my iPhone using Tapatalk |
|
| Author: | Leeann [ Thu Apr 19, 2018 4:40 pm ] |
| Post subject: | Re: My KJ in progress |
Looking good, Alec. |
|
| Author: | TheBlueKJ [ Thu Apr 19, 2018 10:14 pm ] |
| Post subject: | Re: My KJ in progress |
Thanks! |
|
| Author: | TheBlueKJ [ Fri Apr 27, 2018 10:19 am ] |
| Post subject: | Re: My KJ in progress |
Changed the pitman shaft seal and had to take the front driveshaft off to grease it up. That center ling ball yoke is a PITA to grease. The flush zerk wasnt accepting grease so I had to squirt it in around the boot and work it into the joint And on another note: So if you have an old tired engine, NEVER EVER EVER NEVER put synthetic or synthetic blend in it. IT WILL burn and leak oil faster than you can put it in I learned this the hard way.    Sent from my iPhone using Tapatalk |
|
| Page 14 of 14 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|