just got my 03 liberty sport done. its got a 3in roughcountry lift,1.5in wheelspacers,and 265/75/16 traildiggers. it handles great and rides better than it did new.just would like to know how to add apic oof it on here.

Upload the picture to a free host site like Photobucket or something.

From there go to the actual image link (will end in .jpg more then likely). Open up a post here and above the body of the post you will see a bunch of white boxes with options. Click the box that says IMG and put the link in between what it puts in the message.

[ img]Insert Link Here[/img ]

_________________
2010 Jeep JK - Mango Tango
TeraFlex 2.5 suspension lift
Rancho RS9000Xl adjustable shocks
Tom Woods 1310 Front driveshaft
JKS Quicker front Disconnects
Synergy 1.75" Wheel spacer

I understand you are excited but expect some negative for that lift, it's not really good.



I highly doubt that, since you still have the same OEM springs and shocks up front. Tire size is also a bit big (32"), did you regear? If not you can no longer use O/D.

Welcome to LOST btw.

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es

no it rides great . i did not use oem springs they are a set of gaeibral struts and springs in the front and they are just right on the sprigng rate it is sitin about 1/4 in up in font right now after 500 miles and 8 hours of offroading. and no regear was needed so far works great in od droped tack about 500 rpm at 65. when im offroad i use 4 low so it is workin great. i will find out this summer at the mud drags if it needs regear or not. when i was stock it was the fastest thing in the 4 &6 cyld class.

No regear was needed ?
OK

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited