Just some recent pictures of my KK with the Econo OME lift.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| KK with OME lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=75560 |
Page 1 of 1 |
| Author: | Gageraid [ Tue Jun 11, 2013 5:29 pm ] |
| Post subject: | KK with OME lift |
Just some recent pictures of my KK with the Econo OME lift.
|
|
| Author: | jjohnson1892 [ Tue Jun 11, 2013 7:57 pm ] |
| Post subject: | Re: KK with OME lift |
Looks great, I'm now extremely inspired to get my hands on an OME lift.. 
|
|
| Author: | Gageraid [ Tue Jun 11, 2013 8:18 pm ] |
| Post subject: | Re: KK with OME lift |
Thanks. Figured these were good reference pics. |
|
| Author: | khalilw [ Tue Jun 11, 2013 10:24 pm ] |
| Post subject: | Re: KK with OME lift |
Hey gage! I'm sorry I believe you already answered these questions before, but I can't remember where. Did you used front top plates, rear isolators or clevis lift? How much inches of height do you have from center of the wheel to the fender? Heavy Duty or medium coils and shocks? How's the ride??  Nice KK buddy! 
|
|
| Author: | Gageraid [ Tue Jun 11, 2013 10:46 pm ] |
| Post subject: | Re: KK with OME lift |
khalilw wrote: Hey gage! I'm sorry I believe you already answered these questions before, but I can't remember where. Did you used front top plates, rear isolators or clevis lift? How much inches of height do you have from center of the wheel to the fender? Heavy Duty or medium coils and shocks? How's the ride?? Nice KK buddy! I don't mind answering at all. Nothing added. Stock upper control arms. Heavy duty front, medium rear. The ride is great, it gets a little better with each mile since it's only got 500 miles so far. I still haven't taken measurements. |
|
| Author: | Gageraid [ Tue Jun 11, 2013 10:54 pm ] |
| Post subject: | Re: KK with OME lift |
Also notice the sweet KK sticker my girlfriend bought me. She's a keeper. |
|
| Author: | khalilw [ Wed Jun 12, 2013 1:25 am ] |
| Post subject: | Re: KK with OME lift |
Good to know! I believe I'll pick the same setup + JBA UCAs, Top plates, clevis and rear isos . Someday I will. 
|
|
| Author: | Gageraid [ Wed Jun 12, 2013 1:27 pm ] |
| Post subject: | Re: KK with OME lift |
The econo lift was very affordable. |
|
| Author: | TrueTexUSN [ Wed Oct 23, 2013 9:56 pm ] |
| Post subject: | Re: KK with OME lift |
Have you had any issues with the stock UCAs? This lift looks like the one for me and I have heard of others not getting the JBA UCAs right away; just wondering if the stocks are still holding up okay. What is the big difference with the JBA UCAs? Thanks! |
|
| Author: | TIJKK1220 [ Thu Oct 24, 2013 12:40 am ] |
| Post subject: | Re: KK with OME lift |
TrueTexUSN wrote: Have you had any issues with the stock UCAs? This lift looks like the one for me and I have heard of others not getting the JBA UCAs right away; just wondering if the stocks are still holding up okay. What is the big difference with the JBA UCAs? Thanks! Correct me if I'm wrong guys: They help a bit with bringing your angles back into spec and also help with realigning the front end. They are a great add on to get but with the OME lift even with spacers and clevis lift it doesn't throw the angles to far out of whack to be just fine running without them. |
|
| Author: | tommudd [ Thu Oct 24, 2013 1:00 am ] |
| Post subject: | Re: KK with OME lift |
JBA UCAs are a little bit longer and also have the ball joint sitting at a better angle when lifted than what the stock ones would. Both of those things make it easier to get it closer to good over all alignment. The ball joint not being on such a severe angle will last longer as well If only running the say OME lift with nothing else added then you'll be fine with stock arms, start adding in clevis/top plate then you're in the range where it will be harder to get a good alignment and will wear the ball joint |
|
| Author: | Gageraid [ Thu Oct 24, 2013 7:06 am ] |
| Post subject: | Re: KK with OME lift |
TrueTexUSN wrote: Have you had any issues with the stock UCAs? This lift looks like the one for me and I have heard of others not getting the JBA UCAs right away; just wondering if the stocks are still holding up okay. What is the big difference with the JBA UCAs? Thanks! Still no issues and love the lift. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|