| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rusty's lift is installed! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=8038 |
Page 1 of 1 |
| Author: | meduncan [ Sat Apr 29, 2006 5:21 pm ] |
| Post subject: | Rusty's lift is installed! |
Just got back from Eddo's where we installed the Rusty's suspension lift on my KJ. Thanks again Eddo for all your help. Thanks for also spotting that tranny issue. I've ordered the skid so that I don't collect any more of those surprises. Anyway, here's a pic of the Renny before the 2.5" lift 
and after 
|
|
| Author: | bighause [ Sat Apr 29, 2006 9:01 pm ] |
| Post subject: | |
Looks great! Rusty makes an excellent lift. It will drive like a completely different Jeep offroad now! |
|
| Author: | liberty 4 all [ Sun Apr 30, 2006 4:28 am ] |
| Post subject: | |
looks great...congrats! |
|
| Author: | jeepmed [ Sun Apr 30, 2006 6:49 am ] |
| Post subject: | |
looks great now come tires. |
|
| Author: | Science_Guy [ Sun Apr 30, 2006 7:29 am ] |
| Post subject: | |
I so need to get me one of those... 
|
|
| Author: | Eddo [ Sun Apr 30, 2006 8:02 am ] |
| Post subject: | |
Looks good. Post some pictures when you get the new tires. |
|
| Author: | elephantrider [ Sun Apr 30, 2006 5:59 pm ] |
| Post subject: | |
i knew it wouldnt be long after i saw you that you would put a lift on the renny... got a couple of runs comin up, you otta join us.. 
|
|
| Author: | meduncan [ Sun Apr 30, 2006 8:27 pm ] |
| Post subject: | |
Yeah, I had been planning on doing it for a while and finally saved enough money to spring for the lift. Picked up a pair of jack stands and a sledge hammer to pounded out my pinch weld today. A dremmel, some love taps, and some truck bedliner paint later and it's done. Now I'm all set for those new Wrangler Silent Armor's to be installed on Tuesday. Those and the tranny skid will complete the enhancements for this year then it's off to the trails. I plan on going to the June 3 Haspin Acres run so I'll see you there JasonK. Here's a couple pics of my work on the pinch weld. Driver side 
Passenger's side 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|