MOOG Lower Ball Joint Info

JJsTJ · **Posted:** Thu Aug 03, 2006 7:54 pm

Link to Moog Problem Solver PDF w/ Info on their better design.

JJsTJ · **Posted:** Sun Mar 04, 2007 7:32 pm

LiLredLibby · **Posted:** Sun Mar 11, 2007 12:04 am

JJsKJ wrote:

Link to Moog Problem Solver PDF w/ Info on their better design.

Good info right there JJ'sKJ,and just adding that more times then not ,you can get these joints installed elsewhere,and turn in all necessary reciepts and info for reimbursment from DC.

Ron

Dje Ryu · **Posted:** Sun Mar 11, 2007 11:03 am

slightly off-topic but, does anyone know if Moog makes greasable UBJs for the OEM arms?

LiLredLibby · **Posted:** Sun Mar 11, 2007 1:27 pm

Dje Ryu wrote:

slightly off-topic but, does anyone know if Moog makes greasable UBJs for the OEM arms?

They don't recomend pressing new balljopints in the oem a arms.Not sure there is an application for them anyway.If your going to due or have already done a lift,You might consider going to a Rustys upper a arm.Then you'll kill two birds with one stone.The Rustys arm is a little longer and will help to get your alignment closer.Hope this helps!

Ron
P.S. I think Rustys comes with Moogs or equivilant.

tjkj2002 · **Posted:** Sun Mar 11, 2007 2:27 pm

LiLredLibby wrote:

Dje Ryu wrote:

slightly off-topic but, does anyone know if Moog makes greasable UBJs for the OEM arms?

They don't recomend pressing new balljopints in the oem a arms.Not sure there is an application for them anyway.If your going to due or have already done a lift,You might consider going to a Rustys upper a arm.Then you'll kill two birds with one stone.The Rustys arm is a little longer and will help to get your alignment closer.Hope this helps!

Ron
P.S. I think Rustys comes with Moogs or equivilant.

I'm sure Rusty's come with a uni-ball and Jeepin by Al's UCA's come with greaseable/replaceable balljoints.

MOOG Lower Ball Joint Info

Who is online