LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Mopar Trans Skid install
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=65&t=33252		 Page 1 of 1
Author:  KJ2005 [ Thu Jun 12, 2008 2:53 pm ]
Post subject:  Mopar Trans Skid install
How do you install the Mopar Trans Skid? I seen it and it has mounting holes in a location in the boxed frame with no open area to hold on to the nut while you tighten the bolt down.
Author:  jsc7002 [ Thu Jun 12, 2008 3:00 pm ]
Post subject: 
you need to buy some nutserts and install them first, sorry I dont remember the p/n though someone will chime in with it though
Author:  06 KJ Sport [ Tue Aug 12, 2008 2:43 pm ]
Post subject: 
Anybody???? I also need the nutzerts :cry: Please I just want my skid plate on :cry:
Author:  jsc7002 [ Tue Aug 12, 2008 2:48 pm ]
Post subject: 
06 KJ Sport wrote:
Anybody???? I also need the nutzerts :cry: Please I just want my skid plate on :cry:


how many do you need? i have some that I dont think Ill be using
Author:  06 KJ Sport [ Wed Aug 20, 2008 3:26 am ]
Post subject: 
Do you get the nutzerts from the dealer??
Author:  Blue KJ in PA [ Wed Aug 20, 2008 7:40 am ]
Post subject: 
Here's what I got from my dealer... The parts would need to be ordered and prepaid.

Nutzert (6506644AA) 1.28 each

Bolts (6506027AA) 1.61 each.

Allow 2 to 3 business days for arrival of shippment.



Jeff Lehman

Parts Manager
Author:  Maximum Carnage [ Wed Aug 27, 2008 3:02 pm ]
Post subject: 
Bolts (6506027AA) $1.61 per bolt? Is their something special about them or just a Stealership price?
Author:  Blue KJ in PA [ Wed Aug 27, 2008 3:19 pm ]
Post subject: 
I never got saround to buying them...they are simply the bolts that mate up with the MOPAR nutzerts...more than likely you can get the same combo from the drawers at HD, Lowes, or AceHardware, etc
Author:  tommudd [ Wed Aug 27, 2008 4:56 pm ]
Post subject: 
Good Lord just buy some regular Grade 8 bolts, drill up through the cross members and bolt them on, forget about those cheap junk nutzerks, waste of time putting them in IMO!!! :roll: :wink:

Tom
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/