how do i get rid of the low washer light on my dash. i have unplugged the bottle and plugged it back in and drained the bottle and filled it back up but nothing. it still says i have low washer fluid. i don't have the over head display thing, only the dash read out. it is driving me nuts. thanks.

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap

fill bottle and hold the trip reset down for ~3 sec
if it comes back on next time you start engine you have a defective/dead washer level sensor, or a short/break in the wire.

_________________
2004 khaki metallic KJ
OME HD + Rancho shocks
+ a ScanGage2

When I broke my washer pump I took the tubes off of everything and tied them in the engine compartment and the light went off and didn't come back on. It would stay on until I unplugged it all from the washer bottle.

_________________
My Jeep Build ----> Big Black

thanks for your help. holding the trip reset button reset the alarm.

_________________
2003 KJ Sport
Flowmaster Super 44
OME HD front springs, rusty's strut plate, 3 ring clevis, rusty's rear springs
JBA UCA 4.5
DTT upfront
Reese Tow hitch
ARB Bull Bar
Renegade Light Bar
HiLift jack
Crager Soft 8 15x8
Trxus MT 31x10.50/15
Coming Soon: SFA swap