Wel, I never did find out the bolt pattern from said wheel and tire section!
I had to GOOGLE it!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| After market wheels. Best offset and back spacing??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=65&t=42509 |
Page 1 of 1 |
| Author: | CRD Joe [ Wed Apr 22, 2009 7:01 pm ] |
| Post subject: | After market wheels. Best offset and back spacing??? |
Ok, Im a fan of 15" wheels and NORMAL (read non metric) tire sizes.... I'd like to pick up five Pro Comp 15x8 series 1069 wheels clothed in BFG AT 31x10.50's. What offset and backspacing have you all found to be good? Oops, I guess I should have asked bolt pattern. Standard 5 on 5.5??? Thanks. Tom |
|
| Author: | kingjeep [ Wed Apr 22, 2009 7:08 pm ] |
| Post subject: | |
im not sure but ive been told that kjs have to have at least 16 inch i could be wrong |
|
| Author: | tommudd [ Wed Apr 22, 2009 7:14 pm ] |
| Post subject: | |
check out the tire and wheel section I could tell you everything here but easier for you to go read it all there You can run 15 inch soft 8s or similar but not aluminum etc in 15 inch and no the bolt pattern is not 5 on 5.5 |
|
| Author: | CRD Joe [ Wed Apr 22, 2009 7:21 pm ] |
| Post subject: | |
Thanks Thomas. I didnt realize there was a wheel and tire section. Still learning site navigation..... |
|
| Author: | SNAFU [ Wed Apr 22, 2009 11:08 pm ] |
| Post subject: | |
I think Tom just administered a virtual spanking |
|
| Author: | CRD Joe [ Thu Apr 23, 2009 12:11 am ] |
| Post subject: | |
Wel, I never did find out the bolt pattern from said wheel and tire section!
I had to GOOGLE it! |
|
| Author: | tommudd [ Thu Apr 23, 2009 12:14 am ] |
| Post subject: | |
CRD Joe wrote: Wel, I never did find out the bolt pattern from said wheel and tire section!
I had to GOOGLE it! want a hint???  same as Wranglers (no not the new JKs) same as XJs, same as a lot of smaller Fords..... come on you know now ...right ?
|
|
| Author: | CRD Joe [ Thu Apr 23, 2009 12:17 am ] |
| Post subject: | |
Yes I figured it out. I built an XJ once....... Thanks, I think.
|
|
| Author: | tommudd [ Thu Apr 23, 2009 12:52 am ] |
| Post subject: | |
CRD Joe wrote: Yes I figured it out. I built an XJ once....... Thanks, I think.
Just messing with ya a little, have to mess with the new guy ya know , everyone else would tell me where to go real quick! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|