| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| JBA 4.5 UCA's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=65&t=54769 |
Page 1 of 1 |
| Author: | monkyfart13 [ Sat Aug 07, 2010 3:12 pm ] |
| Post subject: | JBA 4.5 UCA's |
Im roughly 30 seconds from buying a set of JBA 4.5 UCA's and my question is whether or not I should go ahead and spend the extra hundred to get a set of Moog Lower Ball Joints to install at the same time or if I should save my money for something else... Iv broken my upper ball joints while offroading and it was a hefty repair and towing bill, which is why im upgrading to the JBA 4.5 UCA's... but I dont want to get the lower ball joints if they're not going to give ma any advantage over my stock ones. |
|
| Author: | Combat Truck Monkey [ Sat Aug 07, 2010 5:40 pm ] |
| Post subject: | Re: JBA 4.5 UCA's |
When I had my JBA UCAs installed, both Marlin and my shop recommended replacing the lower ball joints at the same time. I'm also with the theory of having greaseable lower ball joints to match the greaseable uppers. |
|
| Author: | monkyfart13 [ Sat Aug 07, 2010 6:00 pm ] |
| Post subject: | Re: JBA 4.5 UCA's |
That's what I figured the answer would be.. Thanx for the help |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|