kj03sport wrote:
what tools do i need to get the blot out for the upper control arm...i worked all day and the front one i used a 18mm socet and a 17mm wrench to get it out with no problem but there is not enough room to work with on the drivers side to get the back one out and i need to no if i need a airwrench or if i need to remove anything to make more room so i can get it out at my house
Same size as front bolt, just need long extensions/ and swivels to reach back in to it have to have the rachet up front by the radiator
also make sure full weight of the KJ is back on wheels before you tighten the new ones back up fully