| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need answer asap http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=65&t=63171 |
Page 1 of 1 |
| Author: | kj03sport [ Sat Oct 15, 2011 8:38 pm ] |
| Post subject: | need answer asap |
what tools do i need to get the blot out for the upper control arm...i worked all day and the front one i used a 18mm socet and a 17mm wrench to get it out with no problem but there is not enough room to work with on the drivers side to get the back one out and i need to no if i need a airwrench or if i need to remove anything to make more room so i can get it out at my house |
|
| Author: | tommudd [ Sun Oct 16, 2011 9:15 am ] |
| Post subject: | Re: need answer asap |
kj03sport wrote: what tools do i need to get the blot out for the upper control arm...i worked all day and the front one i used a 18mm socet and a 17mm wrench to get it out with no problem but there is not enough room to work with on the drivers side to get the back one out and i need to no if i need a airwrench or if i need to remove anything to make more room so i can get it out at my house Same size as front bolt, just need long extensions/ and swivels to reach back in to it have to have the rachet up front by the radiator also make sure full weight of the KJ is back on wheels before you tighten the new ones back up fully |
|
| Author: | TexasRock [ Wed Oct 26, 2011 8:56 pm ] |
| Post subject: | Re: need answer asap |
Not sure about the BLOT.... but for the BOLT... follow the Reverends advice and you should have a come to Jesus meeting... just saying! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|