I'm changing the all of the fluids in my kj, and I'm wondering if its ok to put Amsoil synthetic synchromesh in my transfer case. I have a couple bottles left over from a previous vehicle that I would like to use instead of buying new stuff. This would be the only use that I would have for it, seeing I have an auto transmission. I read that some people have used it, but I would like to get more advice before I put the stuff in.
Thanks,

t-case takes Type IV ATF. that's it.

_________________
2007 Jeep Liberty Sport 4x4 3.7L 6spd

• MOABs with Goodyear Wrangler All-Terrain Adventure With Kevlar 245/70R16
• JBA UCA 4.5
• OME 790/948/90009/N32
• Western Suburbanite 7'4" plow
• DetoursUSA Backbone
• HF 12k# winch

[SIZE="1"]WTB: project liberty near N.NJ. stick shift, 4x4, working motor optional, CHEAP[/SIZE]

X2 that. Use what the FSM says.

_________________
2006 Jeep Liberty CRD
1998 Beetle TDI Malone Tuning Stage 2
2001 Dodge Cummins
2005 Dodge Cummins
ASE, OBDII / VAG-CAN scaner / Service Manual

That junk is to thick for your t-case.Use any ATF(does not matter for the t-case) or 5w-20(dino or synthetic)/5w-30(synthetic only) engine oil will work also.