JFortier777 wrote:
Do you have any pictures of the "crappy" ones?
Sorry I took so long to get back to you. The dealer never called to say they where in. I had to call them. (typical
)
So here are the photos. First we see the original. It’s only about the diameter of a nickel. This is in the frame holding the side of transfer skid in place.
Second we see the larger one. Note how it’s just about the same size as the quarter. This is in the cross member holding the front of the skid.
Waldn wrote:
do they come with bolts when you ordered them?
if not, do you know what size the bolts are?
No I'm sorry this part# is just for the nut. Bolts are metric size M10x35mm with a 1.50pitch (coarse thread) and of course you will need M10 lock washers as well. You can pick them up at Lowe's. Make sure to get grade 8 hardware.
Jason
_________________
Now: "07 steel blue JK Rubicon 2dr
4.5" Rubicon Express lift
rolling on 35"x12.5" Xtreme MT's
Warn M8000 winch
On board Air
Ham radios
Skidrow and kilby skids
Former: '05 Patriot Blue CRD. Lifted, locked, and a few other toys.