Since it is a 97, and you only have it to drag around, I would suggest using hot met glue. If you're careful, you should be able to get it glued on in such a way that it would be cosmetically perfect, and if you ever need to undo it, well, a heat gun and a razor blade will make quick work of getting it off.
But, it you want to use the intended pins, I would take it to a body shop. The may be willing to give you a handful of the clips for little or no charge, and will probably tell you how they work, to boot. In my experience, the people at the two local body shops have been very helpful.
_________________ 2005 Liberty Limited CRD; Air Filter Monitor; Samco Hoses; GDE HOT Tune; RL037142AA TC; KJ Interior Rack from All J Products; JBA Adjust-a-strut lift and A-Arms; 245/75R16 Firestone Destination ATs on Moabs; ARB Bumper; ASFIR Skids; FS-2500 Bypass Filter; ARP studs. 2016 Grand Cherokee Overland CRD.
|