'97 GC Door Molding Came loose
Page 1 of 1

Author:  litton [ Wed Sep 14, 2011 10:30 am ]
Post subject:  '97 GC Door Molding Came loose

I recently aquired a '97 GC limited to tow behind our motorhome and while it work great all of a sudden the drivers door outside molding (no idea what the right term is) has come loose. It's loose at the bottom and back and when I pull it back to look behind it I can see a couple of pins in the door and some wierd plastic pieces that look like they should engage the pins.

How do I get this thing reattached again????

Thaks for any advice.


Author:  user113 [ Fri Oct 07, 2011 10:04 pm ]
Post subject:  Re: '97 GC Door Molding Came loose

Since it is a 97, and you only have it to drag around, I would suggest using hot met glue. If you're careful, you should be able to get it glued on in such a way that it would be cosmetically perfect, and if you ever need to undo it, well, a heat gun and a razor blade will make quick work of getting it off.

But, it you want to use the intended pins, I would take it to a body shop. The may be willing to give you a handful of the clips for little or no charge, and will probably tell you how they work, to boot. In my experience, the people at the two local body shops have been very helpful.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group